Düzlemsel Güneş Kollektörleri Ve Verim Hesaplamaları

dc.contributor.advisor Ekinci, Ekrem tr_TR
dc.contributor.author Tezcan, Mehmet tr_TR
dc.contributor.department Kimya Mühendisliği tr_TR
dc.contributor.department Chemical Engineering en_US
dc.date 2001 tr_TR
dc.date.accessioned 2015-12-08T17:05:37Z
dc.date.available 2015-12-08T17:05:37Z
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2001 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2001 en_US
dc.description.abstract Ülkemizde, üretilen düzlemsel güneş kollektörlerinden bazıları standart dışı, verimsiz ve kısa ömürlü olmakta ve bu durum tüketicilerin görüşlerini ve dolayısı ile pazarın gelişmesini olumsuz yönde etkilemektedir. Bu olumsuz durumdan kurtulmak için kaliteli güneş kollektörlerinin imalatına yönelmeli ve üretilen kollektörlerin verim testleri yapılmalıdır. Bu testler sonucunda, kollektörlerin kendi içlerinde kalite sınıflandırması yapılmalıdır. Düzlemsel kollektörlerin verimini etkileyen önemli parametrelerden birisi yutucu yüzeyin optik özellikleridir. Ülkemizde üretilen kollektörlerin yutucu yüzeyleri, genellikle siyah mat boya ile boyanmaktadır. Son yıllarda seçici yüzeyli plakaların imalatına başlanmış olup, ayrıca ithal plaka uygulamasına da rastlanmaktadır. Bu çalışmada, iç ortam test ünitesi kullanılarak, Türkiye’de çeşitli firmalar tarafından üretilen seçici yüzeyli ve siyah boyalı düzlemsel güneş kollektörlerinin verim testleri yapılmıştır. tr_TR
dc.description.abstract In our country, some of the collectors produced by some companies are out of standard, inefficient and short-lived, and this affects the consumers’ opinions and consequently the progress of the market in a negative way. In order to prevent this state, high quality solar collectors should be produced and must be tested for their efficiency. As a result of these tests, collectors should be classified among themselves according to their qualities. One of the most important parameters that affect the efficiency of the flat plate solar collectors is the optical characterisation of the absorber surface. In our country, usually the absorber surfaces of the collectors are painted in dull black. Recently, plates with selective surfaces are being produced and also, some companies use imported plates. In this project, using the indoor testing unit set, the efficiency tests of the dull-black painted and the selective surfaced flat plate solar collectors produced by several companies in Turkey, are done. en_US
dc.description.degree Yüksek Lisans tr_TR
dc.description.degree M.Sc. en_US
dc.identifier.uri http://hdl.handle.net/11527/11221
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Instıtute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak herhangi bir biçimde yeniden oluşturulması veya dağıtılması yazılı izin alınmadan yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Güneş enerjisi tr_TR
dc.subject Güneş kollektörü tr_TR
dc.subject Seçici yüzey tr_TR
dc.subject yutucu plaka tr_TR
dc.subject Solar energy en_US
dc.subject Solar collectors en_US
dc.subject Selective surface en_US
dc.subject Absorber plate en_US
dc.title Düzlemsel Güneş Kollektörleri Ve Verim Hesaplamaları tr_TR
dc.title.alternative Flat Plate Solar Collectors And Efficiency Calculation en_US
dc.type Master Thesis en_US
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
888.pdf
Boyut:
3.87 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.14 KB
Format:
Plain Text
Açıklama