Çelik Çok Katlı Bir Yapıda Dışmerkez Ve Merkezi Güçlendirilmiş Sistemlerin İrdelenmesi

dc.contributor.advisor Piroğlu, Filiz tr_TR
dc.contributor.author Gözüaçık, Çağlar tr_TR
dc.contributor.department Yapı Mühendisliği tr_TR
dc.contributor.department Structural Engineering en_US
dc.date 2006 tr_TR
dc.date.accessioned 2015-07-03T11:34:09Z
dc.date.available 2015-07-03T11:34:09Z
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2006 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2006 en_US
dc.description.abstract Bu tez çalışmasında çelik yüksek katlı bir büro yapısının süneklik düzeyi yüksek merkezi güçlendirilmiş ve süneklik düzeyi yüksek dışmerkez güçlendirilmiş çelik taşıyıcı sistemden oluşacak iki farklı şekildeki çözümlerinin karşılaştırılması için yatay ve düşey yükler altında statik, dinamik ve çelik hesapları, ilgili imalat çizimleri ve maliyet analizi yapılmıştır. Yapı 3,4 m kat yüksekliğine sahip 13 kattan oluşmuştur. Kat alanları 1035m2 olup, her kat alanı için 55 m2 asansör ve merdiven boşluğu mimari amaçlar için bırakılmıştır. Yapı üçlü simetriye sahip üçgen bir form şekilde modellenmiştir. Yapıda bulunan kolonlar, kirişler, çaprazlar ve döşeme kirişleri boyutlandırılırken ve bağlantı detayları oluşturulurken; TS648 (Çelik Yapıların Hesap ve Yapım Kuralları), “Deprem Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik 2006”, dikkate alınmıştır. Yapının, 1. derece deprem bölgesinde ve Z3 sınıfı zemin üzerinde yer aldığı kabul edilmiştir. Yapıda kullanılan çelik profiller ve levhalar St 37 kalitesindedir. Yapının taşıyıcı sisteminin üst yapısının çözümü üç boyutlu olarak ETABS v8.5.0 ile yapılmıştır. Temel sistemi radye temel olarak seçilmiştir. Son bölümde yapının maliyet analizi yapılmıştır. Bu analizde betonarme ve çelik kısım ayrı ayrı hesaplanmış, toplam yapı maliyeti belirlenmiş, dışmerkez ve merkezi güçlendirilmiş çerçevelerin karşılaştırılması yapılmıştır. tr_TR
dc.description.abstract The main objectives of this study is to design, prepare drawings and make cost analysis of a high rise steel structure which consists of eccentrically braced moment frames or concentrically braced moment frames to resist the earthquake forces or wind forces, in order to make comparison of these two different kind of bracing systems for lateral performance. The structure has 13 floors which have 3.4m heights. Every floor has an area of 1035m2, and has 55m2 space used for elevator and stairs for architectural aims. Every storey has three equal rectangular plan views, which constitutes a triangular plan of the building finally. In this study, in the design of horizontal and vertical stability frames, columns, beams, and its own connections; TS648 (Building Code for Steel Structures), Turkish Earthquake Code called “Regulations for Buildings of Disaster Regions 2006”, are taken into consideration. It is assumed that the structure is based in the first degree earthquake zone and on the Z3 soil class. All steel members have quality of St37.The ETABS v8.5.0 is used as a computational program to analyze the superstructure as a load carrying system. Base structure is chosen as mat foundation. At the end the cost analysis is prepared. In this analysis, reinforced concrete and steel parts are formed separately, then the total cost is calculated and the comparison of concentrically and eccentrically braced frames is done. en_US
dc.description.degree Yüksek Lisans tr_TR
dc.description.degree M.Sc. en_US
dc.identifier.uri http://hdl.handle.net/11527/6925
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Taşıyıcı sistemler tr_TR
dc.subject Yüksek Yapılar tr_TR
dc.subject Çelik Yapılar tr_TR
dc.subject Bearing Systems en_US
dc.subject High Structures en_US
dc.subject Steel Structure en_US
dc.title Çelik Çok Katlı Bir Yapıda Dışmerkez Ve Merkezi Güçlendirilmiş Sistemlerin İrdelenmesi tr_TR
dc.title.alternative Comparison Of Concentrically Braced And Eccentrically Braced Frames In A High Rise Steel Structure en_US
dc.type masterThesis en_US
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
4009.pdf
Boyut:
2.21 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.14 KB
Format:
Plain Text
Açıklama