Çok Amaçlı Bir Tribometre Konstrüksiyonu

dc.contributor.advisor Baykara, Cemal tr_TR
dc.contributor.author Say, Umut tr_TR
dc.contributor.department Konstrüksiyon tr_TR
dc.contributor.department Construction en_US
dc.date 2008 tr_TR
dc.date.accessioned 2008-07-03 tr_TR
dc.date.accessioned 2015-07-15T13:37:00Z
dc.date.available 2015-07-15T13:37:00Z
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2008 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2008 en_US
dc.description.abstract Bu çalışmada, aynı anda dört numunenin testine imkan verecek şekilde çok amaçlı bir tribometre konstrüksiyonu geliştirilmiştir. Tasarlanan tribometre; pim-disk mekanizması vasıtasıyla aşınmayı, tartma metoduyla ölçmektedir. Sistemde tahrik, hızı ayarlanabilir bir kendinden redüktörlü alternatif akım motoru ile elde edilmektedir. Motorun ilk mil ile bağlantısı; montaj esnasında oluşabilecek açısal, eksenel ve radyal kaçıklıkları da önlemesi bakımından, bir dişli kavrama vasıtasıyla yapılmıştır. İlk mile ulaşan tahrik ise, diğer millere zincir mekanizması yardımı ile iletilir. Böylece dört adet düşey milde ve dolayısı ile disklerde de tahrik elde edilmiş olur. Disk üstüne pim vasıtasıyla tatbik edilecek kuvvet ise, kol mekanizması yardımıyla temin edilir. Kol mekanizmasının kendi ağırlığı, ölü ağırlık ile dengelenmiştir ve böylece kola asılacak her kütle, ağırlığının dört katı oranında diske etkimektedir. Sonuç itibarıyla; sanayide sıklıkla kullanılan malzemeler ve imalat yöntemleri ile imalatı yapılabilecek olan ve çalışmasında hiçbir teorik engel görülmeyen çok amaçlı bir tribometrenin konstrüksiyonu tasarlanmıştır. tr_TR
dc.description.abstract In this study a multi purpose tribometer, which is testing four specimens at the same time, is developed. The designed tribometer measures the wear by weighing method with the help of pin on disc mechanism. The motion for the system is obtained from a velocity-adjustable reduced alternative current electric motor. The first shaft and the electric motor are connected with a gear coupling which prevents angular, axial and radial misalignments. The transferred motion to the first shaft is forwarded to the other shafts by the help of roller chains. Thus, the motion is obtained both at the four vertical shafts and the discs. The applied force to the disc with the help of pin, is supplied by the arm mechanism. The weight of arm mechanism is balanced with a dead weight. There by, the weight which is hanged on the hang apparatus will act on disc with a ratio of 4:1. Consequently, a multi purpose tribometer is designed considering the most used materials and manufacturing processes in industry. In theory, designed tribometer has no obstacle for running. en_US
dc.description.degree Yüksek Lisans tr_TR
dc.description.degree M.Sc. en_US
dc.identifier.uri http://hdl.handle.net/11527/7851
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Tribometre tr_TR
dc.subject Aşınmanın Ölçülmesi tr_TR
dc.subject Pim-Disk tr_TR
dc.subject Tribometer en_US
dc.subject Measurement of Wear en_US
dc.subject Pin on Disc en_US
dc.title Çok Amaçlı Bir Tribometre Konstrüksiyonu tr_TR
dc.title.alternative A Multi Purpose Tribometer Construction en_US
dc.type masterThesis en_US
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
8647.pdf
Boyut:
2.14 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.16 KB
Format:
Plain Text
Açıklama