Kendiliğinden Yerleşen Betonlarda Çelik Lif Kullanımının İşlenebilirliğe Etkisi

Yükleniyor...
Küçük Resim

Tarih

item.page.authors

Süreli Yayın başlığı

Süreli Yayın ISSN

Cilt Başlığı

Yayınevi

Fen Bilimleri Enstitüsü
Institute of Science and Technology

Özet

Bu tez çalışması kapsamında üç farklı yeni nesil süper akışkanlaştırıcı katkı kullanılarak kendiliğinden yerleşen betonlar üretilmiştir. 350kg/m3 çimento ve 150 kg/m3 uçucu kül oranının ve su miktarının aynı olduğu tüm betonlara değişik oranlarda çelik lif ilave edilmiştir. Her katkı ile 1m3’de 30kg, 45 kg, 60 kg ve hiç lif içermeyen numuneler olmak üzere toplam 12 beton karışımı hazırlanmıştır. Artan çelik lif oranlarıyla birlikte betona katılan katkı miktarları da arttırılarak tüm betonların 60-75 cm arası bir yayılma vermesi sağlanmıştır. Böylece hazırlanan kendiliğinden yerleşen betonların taze haldeki özelliklerini araştırmak amacıyla betonlara serbest yayılma, V hunisi, U kutusu, L kutusu, setleşmiş haldeki özelliklerini araştırmak üzere ise basınç, eğilme, ultrases ve elastisite modülü deneyleri uygulanmıştır. Yapılan deneysel çalışmaların sonucunda kendiliğinden yerleşen betonda artan çeliktel oranının taze beton deneylerinden V hunisinde akış süresini arttırırken, 60 kg/m3 çelik tel içeren bir betonun huniyi tıkamasıyla deneyden sonuç alınamamıştır. Bunun yanında L kutusu ve U kutusu deneylerinde telsiz betonların verdiği sonuçlar sınır değerler arasında kalırken, çelik tel içeren betonların deney aparatlarındaki donatılı geçiş bölgelerini tıkaması sebebiyle bu betonlardan sonuç alınamamıştır. Sertleşmiş beton deneylerinde ise betonda artan çelik tel oranının betonun basınç dayanımı ve elastisite modülünü önemli derecede etkilemediği görülürken, eğilme dayanımını önemli derecede arttırdığı ve ultrases hızlarında bir düşüş eğilimi olduğu gözlenmiştir.
In this study, self-compacting concretes are produced by using three different super plasticizers. To the concretes, which have the same ratio of 350 kg/m3 cement, 150 kg/m3 fly ash and water usage, different ratios of steel fibers were added. With all superplasticizers, 0 kg/m3, 30 kg/m3, 45 kg/m3 and 60 kg/m3 steel fiber were used and 12 different concrete samples were produced. With the increasing of the ratio of steel fiber, 60 – 75 cm of slump flows were provided by increasing the ratio of superplasticizers. In this way to investigate the fresh concrete characteristics slump flow, V funnel, L box and U box tests; to investigate the hardened concrete characteristics pressure, bending strength, elasticity modulus and pulse velocity tests were made. In conclusion of these tests, the increasing of steel fiber ratio in the self-compacting concrete increased the flowing time of concrete in V funnel test, 60 kg/m3 steel fiber containing sample clogged the V funnel so the test did not give any conclusion. However in the L box and U box tests, the results for concretes which does not contain steel fiber were in extreme values, but the tests with concretes which contain steel fiber did not give any results because the steel fibers clogged the reinforced passing area of test apparatus. In the hardened concrete tests, the increasing of the steel fiber ratio did not effect the pressure strength and elastisity modulus but it increased the bending strength of the concrete and decreased the pulse velocity.

Açıklama

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2006
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2006

Konusu

Kendiliğinden yerleşen beton, çelik lif, işlenebilirlik, Self-compacting concrete, steel fiber, workability

Alıntı

Endorsement

Review

Supplemented By

Referenced By