Çentikli, Çentiksiz Beton Kirişlerde Boyut Etkisi
Çentikli, Çentiksiz Beton Kirişlerde Boyut Etkisi
dc.contributor.author | Çağlar, Yasin | tr_TR |
dc.contributor.author | Şener, Sıddık | tr_TR |
dc.date.accessioned | 2017-06-16T09:50:59Z | |
dc.date.available | 2017-06-16T09:50:59Z | |
dc.date.issued | 2015 | tr_TR |
dc.description | Konferans Bildirisi -- Teorik ve Uygulamalı Mekanik Türk Milli Komitesi, 2015 | tr_TR |
dc.description | Conference Paper -- Theoretical and Applied Mechanical Turkish National Committee, 2015 | en_US |
dc.description.abstract | Çentikli, çentiksiz beton kirişlerde Tip I&II boyut etkisi deney sonuçları verilmiştir. Deney kirişleri, geometrik olarak benzer farklı boyutlarda (1:12.5 oranında), 0, 0.02, 0.075, 0.15 ve 0.30 çentik uzunlukludur. Dikdörtgen kesitli kirişlerin kalınlıkları sabit olup 40 mm, yükseklikleri 40 mm den 500 mm ye değişmektedir. Bütün çentik uzunlukları için en büyük yükteki göçme gerilmesi (göçme yükünün, kesite oranı) boyut arttıkça azalmaktadır. Geçerli yönetmelikler boyut etkisini göz önüne almadığı için bu durum aykırı olup göçmede kırılma mekaniği kullanılmalıdır. Bu çalışmada her bir numune için clinometer kullanılarak mesnet dönmeler de elde edilmiştir. | tr_TR |
dc.description.abstract | Test results from a size effect study of Type I&II on notched and unnotched beams are presented. The test specimens were geometrically similar but with different sizes (in the ratio 1:12.5) with different notch length ratios of 0, 0.02, 0.075, 0.15 and 0.3. The beams had rectangular cross sections with constant thickness of 40 mm, depth varied from 40 mm to 500 mm. It was observed that all the notch length ratios exhibited a size effect in which the nominal stress at maximum load (failure load divided by cross-sectional area) decreased as the size was increased. This contradicts with the current codes, which do not account for such a size effect, and indicates that the failure is governed by fracture mechanics. The rotations measured at the supports of each specimen using clinometer are also presented in this study. | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/14611 | |
dc.publisher | Teorik ve Uygulamalı Mekanik Türk Milli Komitesi | tr_TR |
dc.publisher | Theoretical and Applied Mechanical Turkish National Committee | en_US |
dc.rights | Kurumsal arşive yüklenen tüm eserler telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | All works uploaded to the institutional repository are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.title | Çentikli, Çentiksiz Beton Kirişlerde Boyut Etkisi | tr_TR |
dc.type | Conference Paper | en_US |
dc.type | Konferans Bildirisi | tr_TR |