Örme Konfeksiyon Sektöründe Gsd Yöntemi Yardımıyla Üretim Öncesi Sürelerin Belirlenmesi Ve Bant Dengelemesinin Yapılması

thumbnail.default.alt
Tarih
Yazarlar
Özhan, Serdar
Süreli Yayın başlığı
Süreli Yayın ISSN
Cilt Başlığı
Yayınevi
Fen Bilimleri Enstitüsü
Institute of Science And Technology
Özet
Bu çalışmada bir PMTS tekniği olan GSD kullanılarak bir örme konfeksiyon işletmesinde standart zamanların tesbit edilmesi ve bant dengelemesinin yapılması amaçlanmıştır. PMTS teknikleri yeni gelişmiş tekniklerdir. Gözlem ve ölçümden ziyade tekrar eden hareketlerin tanımlanıp, bunlar için standart geliştirmeyi hedefler. GSD sisteminin yapısı çok basit bir işlem olan omuz birleştirme operasyonu ile açıklanabilir. Operatör ön ve arka parçaları kasadan alır, makinanın ayağının altına parçaları konumlandırır, diker, parçaları çevirir ve parçayı bırakır. Tüm işlemler bu beş alt operasyondan oluşmuştur. Bazı vücut hareketleri de bu alt operasyonlara eklenebilir. Yukarıda ifade edilen amaç doğrultusunda, Talu Tekstil San. ve Tic. A.Ş.’ nin dikimhanesinde, GSD tekniğiyle üretimden önce, zaman etüdü yöntemiyle üretim aşamasında, dikilecek modele ait standart süreler bulunmuş ve bant dengelemesi yapılmıştır. GSD yöntemi ile elde edilen sonuçlar, zaman etüdü ile karşılaştırıldığında, GSD yönteminin, zaman etüdünün yerine kullanılabileceği sonucuna varılmıştır. GSD yöntemi kullanılırken, GSD Bilgisayar Programı’ndan faydalanılmıştır. Bazı veriler; GSD, Excel ve İstatistik (Microsta) bilgisayar yazılımları kullanılarak elde edilmiştir.
The purpose of this study is to determine standart times in a textile knitted confection industry and line balancing by using a PMTS technique GSD. The Predetermine Motion Time System (PMTS) techniques are quite developed techniques. They are not based on direct observe or measures. The usual approach to specialized data systems is to identify frequently occuring motions combinations and to set standarts for these elements. The structure of GSD system can be explained with an example of shoulder bounding operation. The operator will reach the back and front parts, position to machine foot, sew, slide parts away, place part aside. Most of operations are consist of these five elements. Some body movements and others can be added to these elements. According to the mentioned purpose; in Talu Tekstil San. ve Tic. A.Ş. Sewing Room, a model is choosed. Before the production stage GSD technique and during the production stage Time Study Method have implemented for to determine the standart times and to set the line balancing. The comperative of these techniques has shown that GSD can be applicable instead of Time Study Method. GSD, excel and statistical (Microsta) are used as software to determine the results.
Açıklama
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 1999
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 1999
Anahtar kelimeler
PMTS, GSD, Zaman Etüdü, Standart Süre., PMTS, GSD, Time Study Method, Standart Time.
Alıntı