Tasarım İvme Spektrumlarının Taban Kesme Kuvvetine Etkisi

dc.contributor.advisorBoduroğlu, M. Hasan
dc.contributor.authorÇelik, Cenk Mert
dc.contributor.departmentYapı Mühendisliği
dc.contributor.departmentStructural Engineering
dc.date2001
dc.date.accessioned2015-12-21T09:57:29Z
dc.date.available2015-12-21T09:57:29Z
dc.descriptionTez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2001
dc.descriptionThesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2001
dc.description.abstractBu çalışmada, zemin sınıflarındaki değişikliğin tasarım ivme spektrumlarına etkileri ve yapılan dinamik analizlerle taban kesme kuvvetlerinin değişimi incelenmiştir. Uniform Building Code 97 ile Afet Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik 97’nin belirlemiş olduğu tasarım ivme spektrumlarının yönetmeliklerce ayrılan beş ayrı deprem bölgesine göre incelenmesi sonucunda, Uniform Building Code 97 yönetmeliğinin 1.derece deprem bölgeleri için aktif faya olan mesafeye göre belirlenen zemin periyotları sayesinde oluşturulan özel tasarım ivme spektrumlarının daha büyük değerler verdiği görülmüştür. Diğer deprem bölgelerinde de UBC97 yönetmeliği ABYYHY97’ye göre daha büyük taban kesme kuvvetleri vermektedir. Meydana gelen depremler ve yarattığı hasarlara bakıldığında ABYYHY97’nin de özel tasarım ivme spektrumlarının hazırlanması olanak sağlamasına karşın bu durum ender olarak ele alınmaktadır. Bu nedenle ABYYHY97’nin bu konuda yapılacak benzer düzenlemeye ihtiyacı vardır.
dc.description.abstractThis study examines the impact of the changes in foundation classes on the design acceleration spectra and the change in base shear strengths through dynamic analyses. Upon the examination of the design acceleration spectra specified in Uniform Building Code 97 and the Regulation Concerning The Buildings To be Constructed in Disaster Zones 97 according to five different earthquake zones, it has been observed that the specific design acceleration spectra formed on the basis of the ground periods determined according to the distance to the active fault for the 1st degree earthquake zones in Uniform Building Code 97 regulation, gave greater values. In other earthquake zones as well, UBC97 regulation gives greater base shear forces in comparison with ABYYHY97. Considering the earthquakes occurred and the damages caused by them, though ABYYHY97 also allows for the preparation of specific design acceleration spectra, this case is rarely discussed. Therefore, ABYYHY97 need a similar regulation on tis matter.
dc.description.degreeYüksek Lisans
dc.description.degreeM.Sc.
dc.identifier.urihttp://hdl.handle.net/11527/11780
dc.publisherFen Bilimleri Enstitüsü
dc.publisherInstıtute of Science and Technology
dc.rightsİTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
dc.rightsİTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
dc.subjectTasarım ivme spektrumu
dc.subjectDeprem
dc.subjectTaban kesme kuvveti
dc.subjectUBC97
dc.subjectABYYHY97
dc.subjectResponse Spectrum Case
dc.subjectEarthquake
dc.subjectBase Shear Force
dc.subjectUBC97
dc.subjectABYYHY97
dc.titleTasarım İvme Spektrumlarının Taban Kesme Kuvvetine Etkisi
dc.title.alternativeThe Impact Design Acceleration Spectra On The Base Shear Strength
dc.typeMaster Thesis

Dosyalar

Orijinal seri

Şimdi gösteriliyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
Ad:
775.pdf
Boyut:
4.27 MB
Format:
Adobe Portable Document Format

Lisanslı seri

Şimdi gösteriliyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
Ad:
license.txt
Boyut:
3.16 KB
Format:
Plain Text
Açıklama