Klasik Isıl İşlemler Ve Modern Yüzey İşlemleri Uygulanmış Ç 1050 (c 45 E) Çeliğinin Abrazif + Erozif Aşınma Davranışının İncelenmesi
Klasik Isıl İşlemler Ve Modern Yüzey İşlemleri Uygulanmış Ç 1050 (c 45 E) Çeliğinin Abrazif + Erozif Aşınma Davranışının İncelenmesi
dc.contributor.advisor | Tülbentçi, Kutsal | tr_TR |
dc.contributor.author | Sarı, Nejat Y. | tr_TR |
dc.contributor.department | Malzeme | tr_TR |
dc.contributor.department | Materials | en_US |
dc.date | 1999 | tr_TR |
dc.date.accessioned | 2015-12-10T12:06:46Z | |
dc.date.available | 2015-12-10T12:06:46Z | |
dc.description | Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 1999 | tr_TR |
dc.description | Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 1999 | en_US |
dc.description.abstract | Bu çalışmada, klasik ısıl işlemler ile bir seri yüzey işlemleri uygulanmış Ç1050 (C45E) çeliğinin abrazif+erozif aşınma davranışı incelenmiştir. Deneyler sonucunda, Ç1050 çeliğinin aşınma miktarının klasik ısıl işlemler ile azaldığı belirlenmiş ancak beklenilen tersine endüksiyon sertleştirme, PVD ile kaplama ve termokimyasal işlemlerin ise iyi sonuç vermedikleri görülmüştür. Buna karşın, ısıl püskürtme işlemleri uygulanmış numunelerde ise aşınma miktarının önemli ölçüde azaldığı hatta püskürtme işlemi sonrası kaplama tabakasına uygulanan yeniden ergitme işleminin aşınma miktarını daha da azalttığı belirlenmiştir. | tr_TR |
dc.description.abstract | In this study, abrasive+erosive wear behaviour of C 1050 (C45E) steel which has been subjected to conventional heat treatments and a series of several surface treatments was examined. As a result, it has been determined that the amount of wear of C45E steel was reduced by conventional heat treatments. On the contrary, it was not reduced by induction hardening, PVD coating and thermochemical treatments. Moreover, it has been shown that the amount of wear of C45E steel which has been subjected thermal spraying methods was more reduced. Even the additionally the amount of wear was reduced considerably by applied remelting treatment which has been applied after coating. | en_US |
dc.description.degree | Doktora | tr_TR |
dc.description.degree | PhD | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/11274 | |
dc.publisher | Fen Bilimleri Enstitüsü | tr_TR |
dc.publisher | Instıtute of Science and Technology | en_US |
dc.rights | İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.subject | Abrazif Aşınma | tr_TR |
dc.subject | Yüzey İşlemleri | tr_TR |
dc.subject | Isıl Püskürtme | tr_TR |
dc.subject | Abrasive Wear | en_US |
dc.subject | Surface Treatments | en_US |
dc.subject | Themal Spraying | en_US |
dc.title | Klasik Isıl İşlemler Ve Modern Yüzey İşlemleri Uygulanmış Ç 1050 (c 45 E) Çeliğinin Abrazif + Erozif Aşınma Davranışının İncelenmesi | tr_TR |
dc.title.alternative | Investigation Of Abrasive+erosive Wear Behaviour Of Conventional Heat Treated And Modern Surface Hardening Methods Applied C 1050 (c45e) Steel | en_US |
dc.type | Doctoral Thesis | en_US |