Pirol Amin Sonlu Silikon Tegomer(si2120) Kopolimerlerinin Elektrokimyasal Ve Elektrorejenerasyon Yöntemleri İle Sentezi
Yükleniyor...
Dosyalar
Tarih
item.page.authors
Süreli Yayın başlığı
Süreli Yayın ISSN
Cilt Başlığı
Yayınevi
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Özet
Bu çalışmada, Pirol(Py) amin sonlu silikon tegomer kopolimerlerinin elektrokimyasal ve elektrorejenerasyon yöntemleri ile sentezi yapılmıştır. Elektrorejenerasyon yönteminde LiClO4 ‘ın Asetonitril çözeltisinde ve Seryum amonyum nitrat (CAN)-tuzu kullanılarak ve belli voltajlar uygulanarak elde edilmiştir. Elde edilen kopolimerlerin, FT-IR, 4-probe katı iletkenlik, elementel analiz, DSC, SEM ve yüzey temas açısı ölçümleri yapılmıştır. Ayrıca örneklerin, UV-Visible ölçümleri de yapılmıştır. Örneklerin özellikleri, Polipirol(PPy) ile karşılaştırılmıştır. Kopolimerlerin iletkenlik ve verimine Py, Si, voltaj ve sürenin etkisi incelenmiştir. Bu4NBF4’ın Asetonitril çözeltisinde, Py-Si kopolimerlerinin voltammetrik ölçümleriyle redoks davranışı, empedans ölçümleri ile kapasitans özellikleri aynı şartlarda elde edilen homopolimer ile karşılaştırılmıştır.
In this study, the copolymerization of Py with amine ended silicone tegomer was synthesized by the methods of electrochemical and electroregeneration. This copolymerization was done in LiClO4/Acetonitril solution under the effect of the oxidation of ceric(IV) ammonium nitrate salt and different voltages applied. The characterization of products was realized with FT-IR and spectrophotometric measurements, DSC, elemental and SEM analyses. 4-probe solid conductivity, cyclic voltammogram, impedance, and contact angle was measured and compared with the homopolymer of PPy’s characteristics.
In this study, the copolymerization of Py with amine ended silicone tegomer was synthesized by the methods of electrochemical and electroregeneration. This copolymerization was done in LiClO4/Acetonitril solution under the effect of the oxidation of ceric(IV) ammonium nitrate salt and different voltages applied. The characterization of products was realized with FT-IR and spectrophotometric measurements, DSC, elemental and SEM analyses. 4-probe solid conductivity, cyclic voltammogram, impedance, and contact angle was measured and compared with the homopolymer of PPy’s characteristics.
Açıklama
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2007
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2007
Konusu
pirol, silikon tegomer(Si2120), kopolimer, seryum amonyum nitrat(CAN), elektrokimyasal polimerizasyon, elektroinduced polimerizasyon., pyrrole, silicone tegomer(Si2120), copolymer, ceric(IV) ammonium nitrate, electrochemical polymerization, electroinduced polymerization
