Katkılı Pet Ve Pvc Atıklarının Seçimli Olarak Ayrılmasına Yönelik Yüzey Özelliklerinin Araştırılması
Katkılı Pet Ve Pvc Atıklarının Seçimli Olarak Ayrılmasına Yönelik Yüzey Özelliklerinin Araştırılması
dc.contributor.advisor | Güney, Ali | tr_TR |
dc.contributor.author | Özdilek, Cihan | tr_TR |
dc.contributor.department | Cevher ve Kömür Hazırlama | tr_TR |
dc.contributor.department | Mineral and Coal Processing | en_US |
dc.date | 2011 | tr_TR |
dc.date.accessioned | 2011-03-04 | tr_TR |
dc.date.accessioned | 2015-08-12T14:01:00Z | |
dc.date.available | 2015-08-12T14:01:00Z | |
dc.date.issued | 2013-01-08 | tr_TR |
dc.description | Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2011 | tr_TR |
dc.description | Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2011 | en_US |
dc.description.abstract | Plastikler atıldığı zaman doğada uzun süre varlığını sürdürerek toprağın ve suyun kirlenmesine neden olmaktadır. Plastiklerin kullanımının artış göstermesi bunun geri dönüşümünü de son yıllarda gündeme getirmiştir. Plastiklerin içerisinde geri kazanılması konusunda en dikkat çeken iki plastik türü vardır; bunlar PET ve PVC’dir. PVC’nin zehirli gazlar ve hidroklorik asit salınımı yapması sebebiyle, çevreye olabilecek zararlarını önlemek adına PET ve diğer plastiklerden ayrılması önem kazanmıştır. Yüzey özelliklerinden faydalanarak PET ve PVC’yi seçimli olarak flotasyon yöntemiyle ayırmak mümkündür. Plastiklerin hepsi doğal hidrofobiktir, bu sebeple plastikleri hidrofilik yapmak amacıyla plastikleştirici reaktifler kullanılarak yüzey özellikleri değiştirilir. İki plastikten birisi hidrofilik yapılarak bastırılırken diğerinin köpüğe tutunarak yüzdürülmesi sağlanır. Kullanılmış plastiklerin ayrılmasında flotasyon yöntemi uygulanabilirliği ve ucuz olması ile en çok tercih edilen yöntemdir. Bu çalışmada amaç, PET ve PVC’nin elektrokinetik potansiyel, temas açısı ve yüzey gerilimi özelliklerinin ile Lignin Alkali ve Dietylene Glycol Dibenzoate reaktiflerinin adsorpsiyon mekanizmasının flotasyonla seçimli olarak ayrılmaları üzerindeki etkilerini belirlemektir. | tr_TR |
dc.description.abstract | When the plastics are left in the nature, they exist for a long time without decomposing, thus cause soil and watery pollution. Since the consumption of plastic materials has risen, their recycling has been an important subject in recent years. PET and PVC are among important plastics in all kinds of plastics. Because PVC releases harmful gases and hydrochloric acid, it should be separated from PET and other plastics. PET and PVC can be separated selectively by flotation method depending on their surface characteristics. All plastics are naturally hydrophobic, therefore plasticizer reagents are used to change the plastics’ surface characteristics in order to make them hydrophilic. As a result, they can be separated while one of these plastics is hydrophilic and sinks; the other one attaches on bubbles and floats. The aim of this research is to examine their surface characteristics such as electrokinetic potential, contact angle, surface tension and adsorption mechanisms of Lignin Alkali and Diethylene Glycol Dibenzoate affecting on selective separation, since flotation is the most preferred method because of its application and low costs for seperating PET and PVC wastes. | en_US |
dc.description.degree | Yüksek Lisans | tr_TR |
dc.description.degree | M.Sc. | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/8384 | |
dc.publisher | Fen Bilimleri Enstitüsü | tr_TR |
dc.publisher | Institute of Science and Technology | en_US |
dc.rights | İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.subject | PET | tr_TR |
dc.subject | PVC | tr_TR |
dc.subject | ayırmak | tr_TR |
dc.subject | flotasyon | tr_TR |
dc.subject | zeta | tr_TR |
dc.subject | potansiyel | tr_TR |
dc.subject | yüzey | tr_TR |
dc.subject | gerilim | tr_TR |
dc.subject | temas | tr_TR |
dc.subject | açı | tr_TR |
dc.subject | PET | en_US |
dc.subject | PVC | en_US |
dc.subject | separation | en_US |
dc.subject | flotation | en_US |
dc.subject | zeta | en_US |
dc.subject | potential | en_US |
dc.subject | surface | en_US |
dc.subject | tension | en_US |
dc.subject | contact | en_US |
dc.subject | angle | en_US |
dc.title | Katkılı Pet Ve Pvc Atıklarının Seçimli Olarak Ayrılmasına Yönelik Yüzey Özelliklerinin Araştırılması | tr_TR |
dc.title.alternative | Role Of Surface Characteristics On Selectively Separation Of Pet And Pvc Wastes | en_US |
dc.type | Master Thesis | en_US |