Kil/pva Ve Organokil/pva Nanokompozitlerin Sentezi Ve Karakterizasyonu

dc.contributor.advisor Güngör, Nurfer tr_TR
dc.contributor.author İşçi, Sevim tr_TR
dc.contributor.department Fizik Mühendisliği tr_TR
dc.contributor.department Physics Engineering en_US
dc.date 2007 tr_TR
dc.date.accessioned 2015-07-09T11:50:59Z
dc.date.available 2015-07-09T11:50:59Z
dc.description Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007 tr_TR
dc.description Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2007 en_US
dc.description.abstract Polimerlerin kullanım alanlarının giderek artmasıyla özelliklerinin geliştirilmesi çalışmaları artmış ve nano ölçekteki katkıların özellikleri çok geliştirdiğinin bulunmasıyla birlikte hangi katkı malzemelerin daha etkili olduğu yönünde çalışmalar başlamıştır. Doğal olarak tabakalı yapıda olan killerin polimer içinde dağıtılabilmesi nedeniyle çok iyi katkı malzemesi olabilekleri anlaşılmıştır. Böylece kil/polimer nanokompozitlerin hazırlanması, karakterizasyonları ve özelliklerinin belirlenmesi ile ilişik çalışmalar başlamıştır. Çalışmada, kil dispersiyonunda kil taneleri arasındaki etkileşimi, kil tanelerinin katyonik yüzeyaktiflerle etkileşimlerini belirleyerek organokil sentezlenmiş, Na aktif bir montmorillonit kili ve onun saflaştırılmış formunun PVA polimeri etkileşimi ile kil/polimer kompozitler, her iki kilin ODTABr yüzeyaktifi ile organokil formuna dönüştürülmelerinden sonra PVA ile etkileşimlerinden organokil/polimer kompozitleri elde edilmiş, kompozitler çeşitli yöntemlerle karakterize edilmiş; reolojik, elektrokinetik, iletkenlik, mekanik, termal özellikleri ve UV geçirgenliği açısından karşılaştırılmıştır. Nanokompozit yapımında çözeltilerin birleştirilmesi ve polimerizasyon olmak üzere iki farklı yöntem kullanılarak hangi yöntemle polimerin özelliklerinin daha çok geliştiği nanokompozit elde edilebileceği belirlenmeye çalışılmıştır. Hazırlanan kil ve organokil/polimer kompozitlerin XRD, FTIR, SEM, TEM analizleri ile nanokompozit oldukları belirlenmiştir. Alçak kil ve organokil konsantrasyonlarında yapraklanmış; konsantrasyonlar arttırıldığında tabakalaşmış yapılardan oluşan nanokompozitler olduğu anlaşılmıştır. Nanokompozit yapımı ile PVA polimerinin mekanik, termal özelliklerinin geliştiği, UV geçirgenliğinin bir miktar azaldığı (pek değişmediği), akış ve elektrokinetik özelliklerinin değiştiği, killerin ortamın iletkenliğini arttırdığı bulunmuştur. tr_TR
dc.description.abstract Recently, the studies of to improve the properties of polymers increased with increasing industrial applications of polymers. The studies to find which addition is the most effective have been started with the determination of the addition of the nano size particle improved the properties of polymer. The naturally layered structure of clay is understood to be an effective addition for polymer because it can be render easily in polymer matrix. Therefore, the studies to determine the properties, the characterization and the preparation methods of clay-polymer nanocomposite have been started. In this study, determining the interaction of the clay particles and cationic surfactant, organoclay has been synthesized. Clay-polymer nanocomposites have been made with the interaction of PVA polymer and four different types clay, which are the Na-activated montmorillonite, the purificated form of the montmorillonite, and their organoclay forms. The composites have been characterized by different methods for comparison of the rheologic, electrokinetic, thermal, mechanical, ionic conductivity, and UV transparency properties. Two different methods, which are intercalation of polymer or pre-polymer from solution method and in situ intercalative polymerization method, are used to make nanocomposite to understand which method is more effective to obtain better nanocomposite properties. The prepared clay and organoclay polymer composites are defined as nanocomposites by the analysis of XRD, FTIR, SEM, and TEM. The exfoliated structure has been found for the low clay or organoclay content. The increase of clay content resulted the intercalated structure for nanocomposites. By making nanocomposites, the mechanical, thermal, and ionic conductivity properties of PVA polymer has improved, the rheologic and electrokinetic properties have changed and the UV transparency of PVA has decreased. en_US
dc.description.degree Doktora tr_TR
dc.description.degree PhD en_US
dc.identifier.uri http://hdl.handle.net/11527/7201
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Montmorillonit tr_TR
dc.subject PVA tr_TR
dc.subject Kil-Polimer Nanokompozit tr_TR
dc.subject Montmorillonite en_US
dc.subject PVA en_US
dc.subject Clay-Polymer Nanocomposite en_US
dc.title Kil/pva Ve Organokil/pva Nanokompozitlerin Sentezi Ve Karakterizasyonu tr_TR
dc.title.alternative Preparation, Characterization Of Clay/pva And Organoclay/pva Nanocomposites en_US
dc.type Thesis en_US
dc.type Tez tr_TR
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
7068.pdf
Boyut:
23.18 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.14 KB
Format:
Plain Text
Açıklama