Betonarme Bir Binanın Tasarımında Taban İzolasyonunun Bina Maliyetine Etkisinin İncelenmesi

dc.contributor.advisor Güler, Kadir tr_TR
dc.contributor.author Keskin, M. Tarık tr_TR
dc.contributor.department Yapı Mühendisliği tr_TR
dc.contributor.department Structural Engineering en_US
dc.date 2005 tr_TR
dc.date.accessioned 2015-07-03T11:34:03Z
dc.date.available 2015-07-03T11:34:03Z
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2005 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005 en_US
dc.description.abstract Bu çalışmada, depreme karşı korunma yöntemlerinden biri olan taban yalıtımı sistemi ve sönümleyiciler hakkında bilgi verilmiştir. İzolatörlerin çeşitleri, genel çalışma prensipleri ve mekanik karakteristikleri anlatılmış ve uygulama esasları hakkında bilgi verilmiştir. Taban yalıtımı ile ilgili uluslararası standartlarda tarif edilen hesaplamalar açıklanmıştır. Ayrıca genel dinamik formüller gösterilmiştir. Analiz için ETABS bilgisayar programı kullanılmış, programın çözüm mantığı hakkında bilgi verilmiştir. Uygulama bölümünde, depremden en az hasarla çıkması ve depremden hemen sonra faaliyet göstermesi düşünülen altı katlı bir hastane yapısı kullanılmıştır. Bu yapı öncelikle, ankastre mesnetli olarak daha sonra taban yalıtımlı olarak çözülmüştür. Bu uygulamada sürtünmeli sarkaç tipi izolatör kullanılmıştır. İki sistem için analiz sonuçları karşılaştırılmış ve davranış şekilleri incelenmiştir. Son olarak da iki sistem arasında maliyet karşılaştırılması yapılmıştır. tr_TR
dc.description.abstract In this study, the information about the base isolation system that is one of the methods of protection against earthquake and about dampers was given. The types of isolators, general working principles and mechanical characteristics were explained and the essentials of application were defined. The calculations about base isolation described in the international codes, are explained. Also general dynamic formulations are shown. To analyze the system, the computer program ETABS was used and the information about the logic of analyzing the system was given. In the application part, a six storied building of hospital was used. This structure would have the least damage by the earthquake and would display activity just after the earthquake. First, it is solved as fixed based and than base isolated. In this application, the Friction Pendulum Bearings were used. The analysis results for both systems were compared and the behaviour types were examined. Finally, the comparison of costs between both systems was done. en_US
dc.description.degree Yüksek Lisans tr_TR
dc.description.degree M.Sc. en_US
dc.identifier.uri http://hdl.handle.net/11527/6886
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject taban yalıtımı tr_TR
dc.subject izolatör tr_TR
dc.subject deprem tr_TR
dc.subject maliyet karşılaştırması tr_TR
dc.subject base isolation en_US
dc.subject isolator en_US
dc.subject earthquake en_US
dc.subject comparison of costs en_US
dc.title Betonarme Bir Binanın Tasarımında Taban İzolasyonunun Bina Maliyetine Etkisinin İncelenmesi tr_TR
dc.title.alternative A Cost Effect Research For The Base Isolated Reinforced Concrete Building en_US
dc.type Master Thesis
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
2835.pdf
Boyut:
892.32 KB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.14 KB
Format:
Plain Text
Açıklama