Askeri Sahil Güvenlik Botlarının İmalatında Kompozit Malzeme Kullanımı

dc.contributor.advisor Dikicioğlu, Adnan tr_TR
dc.contributor.author Güneş, İlter tr_TR
dc.contributor.department Savunma Teknolojisi tr_TR
dc.contributor.department Defence Technology en_US
dc.date 2002 tr_TR
dc.date.accessioned 2015-12-24T17:26:27Z
dc.date.available 2015-12-24T17:26:27Z
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2002 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2002 en_US
dc.description.abstract Bu çalışmada, uzunlukları 15-60 m arasında olup, hızları 20 knot’un üzerinde olan yüksek performanslı askeri ve sivil deniz taşıtlarının gövdelerinin imalatında, performans ve maliyet kriterleri dahilinde kullanılabilecek en uygun malzemenin seçimi incelenmiştir. Alternatif bot inşa malzemeleriyle karşılaştırıldığında, yüksek özgül dayanım ve özgül modül değerlerine sahip olan kompozit malzemelerin kullanımının optimum seçenek olduğu değerlendirilmiştir. Yapının gerekli yerlerinde, düşük yoğunluğa ve yüksek dayanıma sahip ileri kompozit malzeme Kevlar’ın geleneksel deniz taşıtlarında çok sık kullanılan E-Camı lifleri ile birlikte kullanımı sayesinde teknenin ağırlık ve kalınlığında azalma sağlanarak, çekme ve çarpma dayanımlarında artış elde edildiği görülmüştür. Buna ek olarak, gelişmiş karbon liflerinin çok fazla dayanım gerektiren yerlerde kullanılması ile teknenin dayanımı arttırılarak hafif ve yüksek performanslı bir yapı elde edildiği gözlenmiştir. Tekneden beklenen özel amaçların gerçekleştirebilmesi için, tek cidarlı konstrüksiyon sistemi ile üretilen gövdede, geleneksel polyester reçine yerine ileri vinilester reçinenin kullanılmasının, yapının daha dayanıklı olmasına ve istenilen performans değerlerine ulaşılmasına imkan sağladığı görülmüştür. tr_TR
dc.description.abstract In this study, it has been examined the selection of the most convenient material that can be used in the production of the hulls of high performance military and general purpose marine crafts with hull lengths in the order of 15 m to 60 m and with speeds in excess of 20 knots considering the performance and cost criterias. Comparing with the alternative boatbuilding materials, it has been evaluated the usage of composite materials is the optimum choice due to their high specific strength and specific modulus. The usage of Kevlar, advanced composite fibres having low density and high strength, together with E-Glass fibres, the most common fibres in the production of general purpose marine craft, in the required places of the structure has caused a decrease in the weight and thickness and an increase in the tensile and impact resistance of the craft. Additionally, it has also been observed an increase in the strength of the vessel by using advanced carbon fibres in the places where the strength is mostly needed and it is also obtained a lightweight and high performance structure. It has been concluded that, by applying advanced vinylester resin to the fibres instead of conventional polyester resin, to verify the special objectives of the craft, the hull structure, constructed with single skin construction system, become more strong and stable and desired performance level has been obtained. en_US
dc.description.degree Yüksek Lisans en_US
dc.description.degree M.Sc. tr_TR
dc.identifier.uri http://hdl.handle.net/11527/12044
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Çok Amaçlı Taktik Platform tr_TR
dc.subject Kevlar tr_TR
dc.subject Karbon Lifleri tr_TR
dc.subject Multi Role Tactical Platform en_US
dc.subject Kevlar en_US
dc.subject Carbon Fibres en_US
dc.title Askeri Sahil Güvenlik Botlarının İmalatında Kompozit Malzeme Kullanımı tr_TR
dc.title.alternative The Usage Of Composite Materials In The Production Of Military Coast Guard Vessels en_US
dc.type Master Thesis
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
1337.pdf
Boyut:
10.1 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.16 KB
Format:
Plain Text
Açıklama