Prefabrik Konsol Kolonların Tasarımında Uygun Deprem Kaydı Seçimi Ve Davranışın İrdelenmesi

dc.contributor.advisor Yüksel, Ercan tr_TR
dc.contributor.author Hasel, Fatma Betül tr_TR
dc.contributor.authorID 10012462 tr_TR
dc.contributor.department Yapı Mühendisliği tr_TR
dc.contributor.department Structural Engineering en_US
dc.date 2013 tr_TR
dc.date.accessioned 2013-08-16 tr_TR
dc.date.accessioned 2015-07-03T11:29:11Z
dc.date.available 2015-07-03T11:29:11Z
dc.date.issued 2013-08-29 tr_TR
dc.description Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2013 tr_TR
dc.description Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2013 en_US
dc.description.abstract İTÜ İnşaat Fakültesi Yapı ve Deprem Mühendisliği Laboratuvarında gerçekleştirilmiş olan 13 adet prefabrik konsol kolon deneyine ait sonuçlar kullanılmıştır. Bu kapsamda 30×30 cm, 35×35 cm, 40×40 cm kesit boyutlarına ve farklı boyuna donatı oranlarına sahip prefabrik kolonun deneylerde kullanılan yerdeğiştirme fonksiyonları esas alınarak doğrusal olmayan statik çözümlemesi analitik olarak yapılmıştır. Model kalibrasyonu çalışmaları tamamlandıktan sonra, ilgili kolonların seçilen dört grup deprem etkisinde Doğrusal Olmayan Zaman Tanım Alanında Dinamik Analizleri gerçekleştirilmiştir. Elde edilen sonuçlar değerlendirilerek kesit boyutu ve boyuna donatı oranlarının kolon performansları üzerindeki etkileri tartışılmıştır. (DBYBHY’2007) de tanımlanmış bulunan tasarım depremine uygun yedi adet yakın ve yedi adet de uzak deprem kaydı PEER veribankasından elde edilmiştir. Bu kayıtlar gerçek kayıtlar olarak adlandırılmıştır.İki grup içinde toplanan gerçek kayıtlardan, yazılım kullanılarak elastik ivme spektrumları DBYBHY’2007 de verilen tasarım ivme spektrumu ile örtüşen üretilmiş kayıtlar elde edilmiştir. Böylelikle uzak-gerçek, uzak-üretilmiş, yakın-gerçek, yakın-üretilmiş olmak üzere toplam dört grup ivme kaydı oluşturulmuştur. Seçilen ivme kayıtları için literatürde tanımlanmış farklı büyüklük ölçütleri hesaplanmış ve birbirleri ile karşılaştırılmıştır.. Dört grup deprem kaydı için, her kolonda oluşan tepe yatay yerdeğiştirmesi, tepe dönmesi, göreli kat ötelemesi, taban kesme kuvveti ve taban momenti büyüklükleri sonuç dosyalarından ayıklanmıştır. Farklı prefabrik kolonlar üzerinde gerçekleştirilen analizler sonucunda, yakın depremlerin uzak depremlere göre daha büyük deprem istemleri ürettiği görülmüştür. Yer hareketi hızı ile bu büyüklüğe bağlı büyüklük ölçütlerinin diğer ölçütlere kıyasla kolon tasarımında kullanılabileceği yapılan çalışmalar sonucunda gözlemlenmiştir. tr_TR
dc.description.abstract In this study, experimental results of the 13 prefabricated reinforced concrete columns with different sectional properties which were tested in the Structural and Earthquake Engineering Laboratory have been used. To determine the “exact” behaviour of the prefabricated columns, nonlinear static analyses which were based on the displacement protocols used in the experimental works are performed first for the several sectional dimensions namely 30×30cm, 35×35cm, 40×40cm and longitudinal reinforcement ratios. It is selected seven acceleration records of near fault and far fault character, from the PEER Database.. The records gathered in two sub-groups of near fault and far fault are modified by using program. Different groups of earthquake records are defined such as far-real, near-real, far-matched and near-matched. For the four groups of earthquake records, the demands of the precast columns such as the top displacement, top rotation, relative story drift, base shear force and base moment are selected from the output files of the analyses. The demands are presented in the graphics against the fundamental vibration periods. Besides, the intensity measures are compared for each of the selected and matched ground motion records. As a concequence of the analyses performed on the discrete precast columns, it is mentioned that the near-fault type earthquakes are generating much more earthquake demands than the far fault type earthquakes. It is also observed that the peak ground velocity and the intensity measures depending on it could be used to determine which acceleration records can be used for desing of the prefabricated columns rather than other intensity measures. en_US
dc.description.degree Yüksek Lisans tr_TR
dc.description.degree M.Sc. en_US
dc.identifier.uri http://hdl.handle.net/11527/6697
dc.publisher Fen Bilimleri Enstitüsü tr_TR
dc.publisher Institute of Science and Technology en_US
dc.rights İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.subject Prefabrik konsol kolonlar tr_TR
dc.subject yakın depremler tr_TR
dc.subject uzak depremler tr_TR
dc.subject büyüklük ölçütleri tr_TR
dc.subject hasar ölçütleri tr_TR
dc.subject şiddet ölçütleri tr_TR
dc.subject yer hareketi hızı tr_TR
dc.subject Prefabricated reinforced columns en_US
dc.subject Intensity measures en_US
dc.subject near-fault type records en_US
dc.subject far-fault type records en_US
dc.subject Peak Ground Accelaration en_US
dc.title Prefabrik Konsol Kolonların Tasarımında Uygun Deprem Kaydı Seçimi Ve Davranışın İrdelenmesi tr_TR
dc.title.alternative Selection Of The Earthquake Records In Desing Of Prefabricated Cantiliver Columns And Assesment Of Their Nonlinear Behavior en_US
dc.type Master Thesis en_US
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
13969.pdf
Boyut:
28.29 MB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.16 KB
Format:
Plain Text
Açıklama