Tabakali Kompozitlerde Fiber Yönlenme Açisinin Darbe Davranişina Etkisi

dc.contributor.author İçten, Bülent Murat tr_TR
dc.contributor.author Karakuzu, Ramazan tr_TR
dc.contributor.author Ataş, Cesim tr_TR
dc.date.accessioned 2018-01-29T12:14:21Z
dc.date.available 2018-01-29T12:14:21Z
dc.date.issued 2008 tr_TR
dc.description Konferans Bildirisi -- Teorik ve Uygulamalı Mekanik Türk Milli Komitesi, 2008 tr_TR
dc.description Conference Paper -- Theoretical and Applied Mechanical Turkish National Committee, 2008 en_US
dc.description.abstract Bu çalışmada, cam lifi-epoksi kompozitlerinde tabaka sıralanışının darbe davranışına etkileri incelenmiştir. [90/0]₆, [30/0]₆ ve [15/0]₆ şeklinde olmak üzere üç farklı tabakalı kompozit aynı fiber oranları ve tabaka sayısı olacak şekilde üretilmişlerdir. Daha sonra, darbe testi için bu kompozitlerden 100 mmx100 mm boyutlarında numuneler kesilmiştir. Numuneler üzerine düşük hızlı darbe testleri DYNATUP GRC 8200 darbe cihazı kullanarak yapılmıştır. Darbe enerjileri delme oluşuncaya kadar kademeli olarak arttırılmıştır. Darbe cihazı zamana bağlı olarak yük, hız, çökme ve absorbe edilen enerji değerlerini vermektedir. Darbe enerjisi ile absorbe edilen enerji arasındaki ilişkiyi göstermek amacı ile enerji profili yöntemi kullanılmıştır. Sonuçlar, [15/0]₆ kompozitinin yük-çökme eğrisinde maksimum yük değeri civarında geniş olması ve çökmenin fazla olmasından dolayı fazla enerji absorbe etme kapasitesine sahip olduğunu göstermiştir. Bununla birlikte [90/0]₆ kompozitinin maksimum yük değeri en yüksek olmasına karşın çökme değerinin en küçük olmasının sonucu olarak en düşük enerji absorbe etme kapasitesine sahip olduğu görülmüştür. tr_TR
dc.description.abstract In this study, the stacking sequence effects on impact behavior of glass-epoxy composite laminates have been investigated. Three different laminated composites designated as [90/0]₆, [30/0]₆ and [15/0]₆ were manufactured with the same fiber volume fraction and layer numbers. They were then cut into 100mm x 100mm specimens for impact testing. The low velocity impact tests were performed on the specimens by using a DYNATUP GRC 8200 drop weight testing machine. The impact energy was gradually increased for consecutive tests until perforation took place. The instrumented impact test machine gives the time versus load, velocity, deflection and absorbed energy histories. Energy profiling method was used showing the relationship between impact energy and absorbed energy. Results show that the [15/0]₆ composite load-deflection curve has a large plateau around the peak force and highest deflection value, resulting in the highest perforation threshold. However, the [90/0]₆ composite has the highest peak force but lowest deflection value, resulting in the lowest energy absorption capacity for perforation. en_US
dc.identifier.isbn 9789756315026 tr_TR
dc.identifier.uri http://hdl.handle.net/11527/14923
dc.publisher Teorik ve Uygulamalı Mekanik Türk Milli Komitesi tr_TR
dc.publisher Theoretical and Applied Mechanical Turkish National Committee en_US
dc.relation.ispartofseries 15. Ulusal mekanik kongresi tr_TR
dc.rights Kurumsal arşive yüklenen tüm eserler telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. tr_TR
dc.rights All works uploaded to the institutional repository are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. en_US
dc.title Tabakali Kompozitlerde Fiber Yönlenme Açisinin Darbe Davranişina Etkisi tr_TR
dc.type Conference Paper en_US
dc.type Konferans Bildirisi tr_TR
Dosyalar
Orijinal seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.alt
Ad:
083_icten.pdf
Boyut:
343.75 KB
Format:
Adobe Portable Document Format
Açıklama
Lisanslı seri
Şimdi gösteriliyor 1 - 1 / 1
thumbnail.default.placeholder
Ad:
license.txt
Boyut:
3.16 KB
Format:
Plain Text
Açıklama