Röntgen Filmleri Yardımıyla Üç Boyutlu Modelleme Ve Değerlendirme
Röntgen Filmleri Yardımıyla Üç Boyutlu Modelleme Ve Değerlendirme
dc.contributor.advisor | Şeker, Dursun Zafer | tr_TR |
dc.contributor.author | Birgin, Gökçe | tr_TR |
dc.contributor.department | Geomatik Mühendisliği | tr_TR |
dc.contributor.department | Geomathic Engineering | en_US |
dc.date | 2007 | tr_TR |
dc.date.accessioned | 2015-05-14T14:13:37Z | |
dc.date.available | 2015-05-14T14:13:37Z | |
dc.date.issued | 2011-01-04 | tr_TR |
dc.description | Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007 | tr_TR |
dc.description | Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2007 | en_US |
dc.description.abstract | Bu çalışmada, ön kol kemiklerinin (ulna ve radius) özel olarak tasarlanıp üretilmiş bir model ile oluşturulmuş sistemde X-Işını teknolojisi kullanılarak röntgen filmleri çekilmiştir. Röntgen filmleri taranarak dijital hale getirilmiş ve DLT yöntemi kullanılarak resim (piksel) koordinatlarından üç boyutlu obje koordinatları elde edilmiştir. Elde edilen bu obje koordinatlarından üç boyutlu sayısal kol kemiği modeli üretilmiştir. Tasarlanıp üretilen model üzerindeki kontrol noktalarının DLT yöntemi kullanılarak koordinatları tekrar hesaplanmış ve hesaplanan koordinatlar ile model koordinatları karşılaştırılmıştır. Bu sayede nokta konum doğrulu hesaplanmış ve aynı alandaki akademik çalışmalar örnek alınarak yeterli doğrulukta olduğu gözlenmiştir. Ayrıca sonuç ürünün görsel olarak anlaşılır ve kolay yorumlanabilir olduğu görülmüştür. | tr_TR |
dc.description.abstract | In this study, radiographs of forehand bones (ulna and radius) have been taken using X-ray technology in a system composed of a specially designed and produced model. The radiographs have been scanned and digitized and three dimensional object coordinates have been obtained from picture (pixel) coordinates by using DLT method. With these object coordinates, the three dimensional digital arm bone model has been produced. The control point coordinates on the designed and produced model have been recalculated by DLT method and then compared to model coordinates. Thus, point and position have been correctly calculated and it’s accuracy has been checked in accordance with the academic studies in the same area. Besides, the final product has been found to be visually understandable and easily interpretable. | en_US |
dc.description.degree | Yüksek Lisans | tr_TR |
dc.description.degree | M.Sc. | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/1704 | |
dc.publisher | Fen Bilimleri Enstitüsü | tr_TR |
dc.publisher | Institute of Science and Technology | en_US |
dc.rights | İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.subject | X-Işını teknolojisi | tr_TR |
dc.subject | Röntgen Filmi | tr_TR |
dc.subject | 3B’lu Sayısal Modelleme | tr_TR |
dc.subject | Sayısal Görüntü İşleme | tr_TR |
dc.subject | Ulna | tr_TR |
dc.subject | Radius | tr_TR |
dc.subject | X-Ray technology | en_US |
dc.subject | Radiograph | en_US |
dc.subject | 3D Modeling | en_US |
dc.subject | Digital Image Processing | en_US |
dc.subject | Ulna | en_US |
dc.subject | Radius | en_US |
dc.title | Röntgen Filmleri Yardımıyla Üç Boyutlu Modelleme Ve Değerlendirme | tr_TR |
dc.title.alternative | Three Dimentional Modeling And Evaluation With Radiograph | en_US |
dc.type | Master Thesis | en_US |