Yayın: Öngerilmeli Bileşik Silindirlerde Temas Koşullarının Eksenel Simetrik Boyuna Dalga Yayılımına Etkisi
Yükleniyor...
Dosyalar
Tarih
Yazarlar
Danışman
Bölüm / Program
Yapı Mühendisliği
Structural Engineering
Structural Engineering
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Türü
Özet
Bu çalışmada, ön gerilmeli bileşik silindirlerde temas koşulların eksenel simetrik boyuna dalga yayılımına etkisinin incelenmesine aittir. Çalışmada parçalı homojen cisim modeli olarak öngerilmeli elastik cisimlerde üç boyutlu doğrusallaştırılmış elastik dalga yayılımı teorisi kullanılmıştır. Bileşik silindirlerin her biri hiper elastik sıkışabilir malzemeden yapılmış kabul edilip malzemenin mekanik davranışı harmonik potansiyel ile tanımlanmıştır. Silindirler arasındaki temas yüzeyinde süreksizlik derecesi kayma-yay parametresine bağlı olduğu saptanmıştır. Bu parametrenin değişimini gösteren sayısal sonuçlar, dispersiyon eğrilerinin elde edilmesinde genellikle temel modlar kullanılarak sonuçlar bulunmuştur.
In this study, the influence of the interface conditions on the dispersion of the axisymmetric longitudinal waves in the pre-strained compound cylinder. The investigations are performed within the framework of the piecewise homogeneous body model by utilizing the 3D linearized theory of elastic waves in elastic bodies with initial stresses( TLTEWISB). It is assumed that the layers of the compound cylinder are made from high elastic compressible materials and their elasticity relations are given through the harmonic potential. The shear spring type imperfectness of the interface conditions is considered and the degree of this imperfectness is estimated by the shear-spring parameter. Numerical results on the influence of this parameter on the behavior of the dispersion curves related to the fundamental mode are considered.
In this study, the influence of the interface conditions on the dispersion of the axisymmetric longitudinal waves in the pre-strained compound cylinder. The investigations are performed within the framework of the piecewise homogeneous body model by utilizing the 3D linearized theory of elastic waves in elastic bodies with initial stresses( TLTEWISB). It is assumed that the layers of the compound cylinder are made from high elastic compressible materials and their elasticity relations are given through the harmonic potential. The shear spring type imperfectness of the interface conditions is considered and the degree of this imperfectness is estimated by the shear-spring parameter. Numerical results on the influence of this parameter on the behavior of the dispersion curves related to the fundamental mode are considered.
Tanım
Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2011
Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2011
Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2011
Dergi veya Seri
ISSN
ISBN
Haklar
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Anahtar Kelimeler
Bileşik silindir, Süreksiz temas koşulları, Ön gerilme, eksenel simetrik boyuna dalga yayılımı, Dalga dispersiyonu, kayma-yay parametresi, Compound cylinder, imperfect interface conditions, initial strains, axisymmetric longitudinal waves, wave dispersion. shear-spring parameter.
Alıntı
Koleksiyonlar
Onay
Gözden geçir
Tamamlayıcı Bilgiler
Referans Gösteren
17
Görüntülenme
31
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.