Yayın: Mineral Katkıların Yüksek Dayanımlı Betonların Mekanik Davranışına Ve Hızlı Klorür Yayınımına Etkileri
Yükleniyor...
Dosyalar
Tarih
Yazarlar
Danışman
Bölüm / Program
Yapı Mühendisliği
Structural Engineering
Structural Engineering
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Türü
Özet
Yapılan bu çalışmada ince öğütülmüş mineral katkıların yüksek performanslı betonların mekanik davranışına ve klor yayınımına etkileri araştırılmıştır. Mineral katkı olarak yüksek fırın cürufu, uçucu kül ve silis dumanı kullanılmıştır. Üretilen betonlar 0,27 ve 0,35 olmak üzere iki farklı su – bağlayıcı oranında üretilmiştir. Kontrol betonları ile birlikte toplam 8 farklı beton sınıfı üretilmiştir. Su – bağlayıcı oranının düşük olmasından ve mineral katkı kullanımından dolayı yüksek performanslı betonlar elde edilmiştir.
In this study the effects of finely ground mineral admixtures on the mechanical properties and rapid chloride permeability of concrete were investigated. Three different mineral admixtures (fly ash, finely ground granulated blast furnace slag, and silica fume) were used. Two series of concrete with “water - binder” ratios of 0.27 and 0.35 were produced. Eight different concretes including the control concrete were investigated. Due to low water - binder ratios and additional mineral admixtures, high performance concretes were produced.
In this study the effects of finely ground mineral admixtures on the mechanical properties and rapid chloride permeability of concrete were investigated. Three different mineral admixtures (fly ash, finely ground granulated blast furnace slag, and silica fume) were used. Two series of concrete with “water - binder” ratios of 0.27 and 0.35 were produced. Eight different concretes including the control concrete were investigated. Due to low water - binder ratios and additional mineral admixtures, high performance concretes were produced.
Tanım
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2004
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2004
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2004
Dergi veya Seri
ISSN
ISBN
Haklar
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Anahtar Kelimeler
Yüksek performanslı beton, Dürabilite, Mineral katkı, Silis dumanı, Uçucu kül, Yüksek fırın curufu, Civalı porozimetre, Kırılma enerjisi, karakteristik boy, hızlandırılmış klor geçirimliliği, High strength concrete, Durability, Mineral admixture, Silica fume, Fly ash, Blast furnace slag, Mercury intrusioın porosimetry, Fracture energy, characteristic length, rapid chloride permeability
Alıntı
Onay
Gözden geçir
Tamamlayıcı Bilgiler
Referans Gösteren
13
Görüntülenme
265
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.