Yayın: Araç Dış Gürültü Ölçüm Standartlarının Teknik Karşılaştırılması Ve Ölçümlerle Yorumlanması
Yükleniyor...
Dosyalar
Tarih
Yazarlar
Danışman
Bölüm / Program
Otomotiv
Automotive
Automotive
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Türü
Özet
Bu çalışmada, araçların dış gürültülerinin belirlenmesi için kullanılan ECE R-51 ve 70/157/AT düzenlemelerinin tarihsel değişimi ve limitlerin durumu incelenmiştir. Dış gürültü seviyesinin belirlenmesinde kullanılan mevcut ölçüm yöntemine (Ölçüm Yöntemi A) ek olarak yeni belirlenen ölçüm yöntemi (Ölçüm Yöntemi B) teknik olarak karşılaştırılmıştır. BM/AEK tarafından belirli araçlar üzerinde uygulanmış mevcut ve yeni yöntem ile elde edilmiş sonuçlar karşılaştırılarak yorumlanmıştır. Buna ek olarak yeni ve mevcut yöntem bir ağır ticari vasıta üzerinde uygunlanmış ve elde edilen sonuçlar irdelenmiştir. Sonuç olarak, yeni yöntem ile sağlanması zorlaşan test koşullarına rağmen yeni yöntemin ağır ticari vasıtalar olmak üzeri tüm kategorilerdeki araçlar için uygulanabilir olduğu gözlenmiştir.
In this study, historical change and noise level situation of the ECE R-51 and 70/157/EC standards which are used to determine the vehicle exterior noise are investigated. Existing measurement method (Measurement Method A) and new measurement method (Measurement Method B) are technically comprased. Measuerement result which is made on the some vehicles by UN/ECE are compared and interpreted. In addition to the comparison and interpretation of the measurement results, both methods are implemented on a heavy commercial vehicle and results are compared and interpreted as well. In conculusion, notwithstanding diffucult test condition with new measurement method, new method is applicable both heavy commercial vehicles and the other category vehicles.
In this study, historical change and noise level situation of the ECE R-51 and 70/157/EC standards which are used to determine the vehicle exterior noise are investigated. Existing measurement method (Measurement Method A) and new measurement method (Measurement Method B) are technically comprased. Measuerement result which is made on the some vehicles by UN/ECE are compared and interpreted. In addition to the comparison and interpretation of the measurement results, both methods are implemented on a heavy commercial vehicle and results are compared and interpreted as well. In conculusion, notwithstanding diffucult test condition with new measurement method, new method is applicable both heavy commercial vehicles and the other category vehicles.
Tanım
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2008
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2008
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2008
Dergi veya Seri
ISSN
ISBN
Haklar
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Anahtar Kelimeler
Dış gürültü, Standartlar, ECE R-51, 70/157/AT, BM/AEK, Exterior Noise, Standards, ECE R-51, 70/157/EC, UN/ECE
Alıntı
Koleksiyonlar
Onay
Gözden geçir
Tamamlayıcı Bilgiler
Referans Gösteren
39
Görüntülenme
176
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.