Yayın: Boraks Dekahidrat Kristalizasyonu Üzerine Safsızlıkların Etkisi
Yükleniyor...
Dosyalar
Tarih
Yazarlar
Danışman
Bölüm / Program
Kimya Mühendisliği
Chemical Engineering
Chemical Engineering
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Türü
Özet
Bu çalışmada, boraks dekahidratın kristal büyüme ve çözünme hızları üzerinde sodyum hidroksit ve borik asit bileşiklerinin katkı maddesi olarak etkileri araştırılmıştır. Kullanılan bu katkı maddeleri çözeltide sodyum metaborat (NaOH ilavesinde) veya sodyum pentaborat (H3BO3 ilavesinde) oluşumuna ve çözeltinin Na2O/B2O3 mol oranının stokiometrik orana göre değişmesine neden olmaktadır. Deneysel çalışma laboratuar tipi akışkan yataklı kristalizörde ve aşı kristalli ortamda yapılmış, büyüme ve çözünme hızları farklı katkı maddesi konsantrasyonlarında aşırı doygunluğun fonksiyonu olarak belirlenmiştir. Sonuçlar her iki katkı maddesinin incelenen koşullarda boraks dekahidrat kristalizasyonunda, hem doygunluk sıcaklığını değiştirerek termodinamik bir etki gösterdiğini, hemde büyüme ve çözünme hızlarını azaltarak kinetik bir etki gösterdiğini ortaya koymaktadır.
In this study the effects of sodium hydroxide and boric acid as additives on the crystal growth and dissolution rates of borax decahydrate were examined. In fact, the given additives changes the Na2O/B2O mole ratio of the solution. Addition of sodium hydroxide and boric acid causes the formation of sodium metaborate and sodium pentaborate, respectively. Experiments were performed in a fluidized bed crystallizer with added seed. The growth and dissolution rates were determined as a function of supersaturation at different level of additive concentration. It is concluded that both additives have thermodynamic effect on the growth of borax decahydrate by shifting saturation temperatures and show a kinetic effect by retarding the growth and dissolution rates.
In this study the effects of sodium hydroxide and boric acid as additives on the crystal growth and dissolution rates of borax decahydrate were examined. In fact, the given additives changes the Na2O/B2O mole ratio of the solution. Addition of sodium hydroxide and boric acid causes the formation of sodium metaborate and sodium pentaborate, respectively. Experiments were performed in a fluidized bed crystallizer with added seed. The growth and dissolution rates were determined as a function of supersaturation at different level of additive concentration. It is concluded that both additives have thermodynamic effect on the growth of borax decahydrate by shifting saturation temperatures and show a kinetic effect by retarding the growth and dissolution rates.
Tanım
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2002
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2002
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2002
Dergi veya Seri
ISSN
ISBN
Haklar
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Anahtar Kelimeler
Kristalizasyon, Büyüme Hızı, Çözünme Hızı, Boraks Dekahidrat, Safsızlık Etkisi, Crystallization, Growth Rate, Dissolution Rate, Borax Decahydrate, Impurity Effect
Alıntı
Onay
Gözden geçir
Tamamlayıcı Bilgiler
Referans Gösteren
68
Görüntülenme
333
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.