Kobaltın Alumina İçeren Fayalitik Curuflardaki Çözünürlüğünün İncelenmesi
Yükleniyor...
Dosyalar
Tarih
item.page.authors
Süreli Yayın başlığı
Süreli Yayın ISSN
Cilt Başlığı
Yayınevi
Fen Bilimleri Enstitüsü
Institute of Science And Technology
Institute of Science And Technology
Özet
Metal dışı proseslerinde curuftaki metal kayıpları günümüz metalurjistleri için ilgi odağıdır. Özellikle günümüz cevherlerinin metal konsantrasyonlarının azalması ve büyük miktarlarda biriken curuf yığınları buna nedendir. Bakır curuflarındaki kobalt kayıplarının üretim aşamasında azaltılması, ayrıca üretim sonrası oluşan curuflardan kobaltın kazanımı için bu metalin özelliklerinin ve yapısının, fayalitik curuflarla olan davranışlarının bilinmesi gereklidir. Özellikle kobaltın Fe-Co-Cu-S alaşımı ile alumina içeren fayalitik curuf arasındaki dağılımına etki eden parametreler ne ulusal ne de uluslararası alanda yeterli değildir. Bu çalışmada bilimsel araştırmalara temel oluşturabilmek için farklı miktarlarda kobalt içeren bakır alaşımlarının alumina içeren fayalitik curuflarla belli atmosfer ve sıcaklık koşullarında dengeye getirilerek kobalt oksidin curufta çözünme mekanizması araştırılmıştır. Bu çözünme mekanizması kobaltın hem alaşımdaki hem de curufdaki aktivite katsayıları ve aktivite değerlerinin ölçünmesiyle belirlenmiştir.
Metal losses in slags during non-ferrous extractive metallurgical process are of great concern to the metallurgist, especially today as the ores relatively rich in metals are diminishing and large volumes of slags are involved each day in smelting practice. In our country copper extractive slags have a quantity of cobalt depends on ore and/or extractive techniques. In order to minimize the loss of cobalt at production stage or recycle the cobalt from slag, it is necessary to determine its form and origin. There has been a wide divergence of opinion on the subject of the form of copper slags and there is little data about behaviour of cobalt at copper slags. Aim of this study is to satisfy the lack of data about the solubility of cobalt oxide in slags. Not only this, but also these experiments will be useful for recovery of cobalt from copper smelting slags in our country. In this study, the solubility of cobalt in alumina containing iron silicate slags were equilibrated with cobalt-copper alloys at known oxygen pressures and temprature.
Metal losses in slags during non-ferrous extractive metallurgical process are of great concern to the metallurgist, especially today as the ores relatively rich in metals are diminishing and large volumes of slags are involved each day in smelting practice. In our country copper extractive slags have a quantity of cobalt depends on ore and/or extractive techniques. In order to minimize the loss of cobalt at production stage or recycle the cobalt from slag, it is necessary to determine its form and origin. There has been a wide divergence of opinion on the subject of the form of copper slags and there is little data about behaviour of cobalt at copper slags. Aim of this study is to satisfy the lack of data about the solubility of cobalt oxide in slags. Not only this, but also these experiments will be useful for recovery of cobalt from copper smelting slags in our country. In this study, the solubility of cobalt in alumina containing iron silicate slags were equilibrated with cobalt-copper alloys at known oxygen pressures and temprature.
Açıklama
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 1999
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 1999
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 1999
Konusu
Kobalt, Bakır, Curuf, Cobalt, Copper, Slag
