Gemi Kirişinin Nihai Mukavemetinin Tayini
Gemi Kirişinin Nihai Mukavemetinin Tayini
dc.contributor.advisor | Bayraktarkatal, Ertekin | tr_TR |
dc.contributor.author | Tayyar, Gökhan Tansel | tr_TR |
dc.contributor.department | Gemi İnşaatı Mühendisliği | tr_TR |
dc.contributor.department | Naval Architecture | en_US |
dc.date | 2011 | tr_TR |
dc.date.accessioned | 2011-02-15 | tr_TR |
dc.date.accessioned | 2015-08-10T12:48:41Z | |
dc.date.available | 2015-08-10T12:48:41Z | |
dc.date.issued | 2012-08-16 | tr_TR |
dc.description | Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2011 | tr_TR |
dc.description | Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2011 | en_US |
dc.description.abstract | Gemilerin nihai mukavemetini hesaplamak amacıyla kademeli göçme analiz yöntemleri incelenmiştir. Hızlı ve etkin çözüme ulaşmak için Smith yöntemi tercih edilmiştir. Smith yöntemi oldukça basit bir yöntem olmakla birlikte başarısı hesaplamada kullanılacak elemanlara ait ortalama gerilme-ortalama şekil değiştirme diyagramlarına bağlıdır. Elemanlara ait çözümlemede iki boyutlu plak davranışının modellendiği çözüm yerine tek boyutlu ve plak davranışının etkin genişlik tanımı yardımıyla lineerleştirilerek modellendiği kiriş yöntemi seçilmiştir. Geometrik olarak eğrilik değerleri yardımıyla eğri modellemesi kiriş hesaplamalarında uygulanmıştır, malzeme ve geometrik olarak lineer olmayan davranışlarda başarılı sonuçlar elde edilmiştir. Deneysel çalışması gerçekleşmiş 1/3 ölçeğe sahip fırkateyn gemisine ait veriler kullanılarak sayısal hesaplamalar gerçekleştirilmiştir. Elde edilen sonuçlar diğer araştırmacıların geliştirdikleri yöntemlere ait sonuçlarla karşılaştırılmıştır. Son sayısal çalışmada ise büyük tonajlı ham petrol tankerine ait çözümleme yapılmış, aynı şekilde diğer araştırmacıların sonuçlarıyla karşılaştırması yapılmıştır. | tr_TR |
dc.description.abstract | In this thesis, progressive collapse analysis methods are investigated to determine the ship ultimate strength. For achieving fast and efficient solution, the Smith method is preferred, which uses a simple approach, though its performance closely related with the average stress-strain diagrams of the elements used in the analysis. For element-wise solutions, one dimensional beam approach is chosen, in which the plate behavior is modeled through a linearization by using the effective width, instead of two dimensional models, thus an advantage in solution time is accomplished. Curve modeling by using geometrical curvature values is used for beam calculations and easily obtained results are satisfactorily considered under material and geometrical nonlinearities. The final applications of the method are an experimentally studied 1/3 modeled frigate and Very Large Crude Carrier, where the comparison of the predicted values with the results is also presented. | en_US |
dc.description.degree | Doktora | tr_TR |
dc.description.degree | PhD | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/8264 | |
dc.publisher | Fen Bilimleri Enstitüsü | tr_TR |
dc.publisher | Institute of Science and Technology | en_US |
dc.rights | İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.subject | Nihai Mukavemet | tr_TR |
dc.subject | Kademeli Göçme Analizi | tr_TR |
dc.subject | Eğrilik | tr_TR |
dc.subject | Kiriş | tr_TR |
dc.subject | Ultimate Strength | en_US |
dc.subject | Progressive Collapse Analysis | en_US |
dc.subject | Curvature | en_US |
dc.subject | Beam | en_US |
dc.title | Gemi Kirişinin Nihai Mukavemetinin Tayini | tr_TR |
dc.title.alternative | Determination Of Ultimate Strength Of The Ship Girder | en_US |
dc.type | Doctoral Thesis | en_US |