Yayın: Optik Wdm Ağlarında Sanal Topoloji Uyarlamasına Dağıtılmış Bir Yaklaşım
Yükleniyor...
Dosyalar
Tarih
Yazarlar
Danışman
Bölüm / Program
Bilgisayar Mühendisliği
Computer Engineering
Computer Engineering
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Türü
Özet
Sanal topolojinin uyarlaması ile ilgili birçok çalışma yapılmış, fakat problem genelde merkezi olarak ele alınmıştır. Bu çalışmada probleme dağıtılmış bir çözüm getirilmiş, uyarlama görevi merkezdeki bir algoritmadan alınarak, sanal topolojiyi oluşturan düğümlere verilmiştir. Önerilen yeni dağıtılmış sanal topoloji uyarlaması yönteminin çalışabilirliğini ve verimliliğini denemek amacıyla yazılımsal olarak bir simülasyon ortamı oluşturulmuştur. Bu ortamdan elde edilen sonuçlar, sanal topoloji düzenlemesi için hedef kabul edilen trafik ağırlıklı ortalama adım uzaklığının düşürüldüğünü, ağın yükünün dengelenerek daha çok trafiğin ağı kullanmasına imkan sağlandığını ve yüklenmeden dolayı oluşan tıkanıklıkların çözülerek uyarlama işleminin başarıyla gerçekleştirildiğini göstermiştir. Sonuç olarak, dağıtılmış yaklaşımın sanal topoloji uyarlaması probleminin çözümünde kullanılabileceği kanısına varılmıştır.
Many studies has been made over adaptation of virtual topology so far, but the problem was handled by using central solutions. In this study a distributed approach to this problem was introduced and the adaptation was performed by seperate nodes instead of by an adaptation center. To test the useability and effectiveness of proposed distributed approach in a simulation environment, a software testbed was written. According to the results of simulations, traffic weighted avarage hop distance, which is one of the major targets in reconfiguration process, is reduced, much more traffic is allowed to flow on the network by balancing its load and the number of congestions originated from the overloaded situation of the network is reduced. Finally it is concluded that a distributed approach can overcome the virtual topology adaptation problem.
Many studies has been made over adaptation of virtual topology so far, but the problem was handled by using central solutions. In this study a distributed approach to this problem was introduced and the adaptation was performed by seperate nodes instead of by an adaptation center. To test the useability and effectiveness of proposed distributed approach in a simulation environment, a software testbed was written. According to the results of simulations, traffic weighted avarage hop distance, which is one of the major targets in reconfiguration process, is reduced, much more traffic is allowed to flow on the network by balancing its load and the number of congestions originated from the overloaded situation of the network is reduced. Finally it is concluded that a distributed approach can overcome the virtual topology adaptation problem.
Tanım
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2005
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005
Dergi veya Seri
ISSN
ISBN
Haklar
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Anahtar Kelimeler
Optik Ağlar, WDM, Sanal Topoloji Uyarlaması, Optical Networks, WDM, Virtual Topology Adaptation
Alıntı
Onay
Gözden geçir
Tamamlayıcı Bilgiler
Referans Gösteren
14
Görüntülenme
26
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.