Yayın:
Determination of flow parameters for pipe flows by the radiotracer techniques

Basit öğe sayfası
dc.contributor.authorTugrul, B.
dc.contributor.authorKara, N.
dc.date.accessioned2026-01-26T06:19:28Z
dc.date.issued1994-05-01
dc.description.abstractIn this study, the measurement of flow rate in pipes is obtained in the laboratory by two different radiotracing techniques, the “peak to peak” method and the “radiotracer balance” method. Sodium-24 has been used as the radiotracer and irradiation has been done in the I.T.U. TRIOA Mark-II Reactor. The peak to peak method is also applied with only one detector. The sensitivity of the methods are obtained for different conditions. Experimental results which are taken for the techniques are compared to each other and are evaluated with the flow parameters.
dc.description.urihttps://doi.org/10.1007/bf02035912
dc.description.urihttps://dx.doi.org/10.1007/bf02035912
dc.identifier.doi10.1007/bf02035912
dc.identifier.eissn1588-2780
dc.identifier.endpage253
dc.identifier.issn0236-5731
dc.identifier.openairedoi_dedup___::ebe090ff0a5337508df56fe0f5c65863
dc.identifier.startpage245
dc.identifier.urihttps://hdl.handle.net/11527/62306
dc.identifier.volume180
dc.language.isoeng
dc.publisherSpringer Science and Business Media LLC
dc.relation.ispartofJournal of Radioanalytical and Nuclear Chemistry Articles
dc.rightsCLOSED
dc.sdg.typeGoal 7: Affordable and Clean Energy
dc.sdg.typeGoal 6: Clean Water and Sanitation
dc.titleDetermination of flow parameters for pipe flows by the radiotracer techniques
dc.typeArticle
dspace.entity.typePublication

Dosyalar

Koleksiyonlar

Yayınlar