Yayın:
Microstructure and Phase Analysis of Ethyl Silicate-Bonded Alumina-Zircon Refractories

Basit öğe sayfası
dc.contributor.authorSarydikmen, H.
dc.contributor.authorKushkonmaz, N.
dc.date.accessioned2026-01-26T02:56:09Z
dc.date.issued2005-05-01
dc.description.abstractAlumina-zircon refractories are prepared using an aqueous ethyl silicate solution as the gel-polymerized bond. Test specimens are heat-treated by reaction sintering at different temperature (1450 – 1600°C) and holding times (1 – 4 h) to yield new refractory phases zirconium dioxide and mullite. The specimens are tested for strength, porosity, sintering shrinkage, apparent density, and chemical and phase composition using x-ray diffractometry and electron scanning microscopy. Reactive sintering is shown to be a effective route towards obtaining ethyl-silicate-bonded alumina-zircon refractories with tailored microscopic and physical properties.
dc.description.urihttps://doi.org/10.1007/s11148-005-0088-0
dc.description.urihttps://dx.doi.org/10.1007/s11148-005-0088-0
dc.identifier.doi10.1007/s11148-005-0088-0
dc.identifier.eissn1573-9139
dc.identifier.endpage216
dc.identifier.issn1083-4877
dc.identifier.openairedoi_dedup___::ccca83d0995b3d0bda13509050f312f3
dc.identifier.startpage212
dc.identifier.urihttps://hdl.handle.net/11527/58320
dc.identifier.volume46
dc.language.isoeng
dc.publisherSpringer Science and Business Media LLC
dc.relation.ispartofRefractories and Industrial Ceramics
dc.rightsCLOSED
dc.titleMicrostructure and Phase Analysis of Ethyl Silicate-Bonded Alumina-Zircon Refractories
dc.typeArticle
dspace.entity.typePublication

Dosyalar

Koleksiyonlar

Yayınlar