Slow build-up of turbid currents triggered by a moderate earthquake in the Sea of Marmara

Abstract

<p>Earthquake-induced submarine slope destabilization is known to cause debris flows and turbidity currents. These also interact with currents caused by tsunami and seiches resulting in deposits with specific sedimentological characteristics, turbidite-homogenites being a common example. Data on the deep-sea hydrodynamic events following earthquakes are, however, limited. An instrumented frame deployed at the seafloor in the Sea of Marmara Central Basin recorded some of the consequences of a magnitude 5.8 earthquake that occurred Sept 26, 2019 at 10-12 km depth without causing any significant tsunami. The instrumentation comprises a Digiquartz® pressure sensor recording at 5 s interval and a 1.9-2 MHz Doppler recording current meter set 1.5 m above the seafloor and recording at 1-hour interval. The device was deployed at 1184 m depth on the floor of the basin near the outlet of a canyon, 5 km from the epicenter. Chirp sediment sounder profiles indicate a depositional fan or lobe is present at this location. The passing of the seismic wave was recorded by the pressure sensor, but little other perturbation is recorded until 25 minutes later when the instrument, probably hit by a mud flow, tilts by 65° in about 15 seconds. Over the following 10 hours the tilted instrument records bursts of current of variable directions. The last burst appears to be the strongest with velocities in the 20-50 cm/s range, causing enough erosion to free the device from the mud and allowing the buoyancy attached to the upper part of the frame to straighten it back to its normal operation position. Then, the current, flowing down along the canyon axis, progressively decays to background level (≈2 cm/s) in 8 hours. Doppler signal backscatter strength is a proxy for turbidity, sensitive to sand-size suspended particles. Signal strength increased to high values during the event (max -7.6 dB from a background value of -40dB) and decayed over the next three days. These observations show that even a moderate earthquake can trigger a complex response involving mud flows and turbidity currents. We infer simultaneous slope failures at various locations may produce complex current patterns and cause build-up of kinetic energy over several hours.</p>