% 15 Fluorapatit İçeren Potasyum-kalsiyum Mika Cam Seramiklerinin Kristalleşme Davranışları, Mikro Yapısı Ve İşlenebilirlik Özellikleri
% 15 Fluorapatit İçeren Potasyum-kalsiyum Mika Cam Seramiklerinin Kristalleşme Davranışları, Mikro Yapısı Ve İşlenebilirlik Özellikleri
Dosyalar
Tarih
Yazarlar
Özdoğan, Mehmet
Süreli Yayın başlığı
Süreli Yayın ISSN
Cilt Başlığı
Yayınevi
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Özet
Bu çalışmada, %15 fluorapatit içeren potasyum-kalsiyum mika cam seramiklerinin kristalizasyon davranışları, mikro yapısı ve işlenebilirlik özellikleri incelenmiştir. Diğer cam seramikler gibi ürettiğimiz camlara, yapılan diferansiyel termal analiz(DTA) deney verilerine göre planlanan değişik ısıl işlemler uygulanmış, Isıl işlemlerin değişik aşamalarında cam fazından çökelen kristaller X-ışını difraktometresi (XRD) ile belirlenmiştir Isıl işlemlerle gelişen mikro yapılar, taramalı elektron mikroskobunda (SEM) incelenmiştir.. Mikro sertlik deneyleri ile silindirik numunelerin sertlikleri belirlenmiş ve disk numunelere matkap ile delme işlemi uygulanarak işlenebilirlik özellikleri tespit edilmiştir. Kalsiyum mikasının üst kristalizasyon sıcaklığında 1-2 saatlik sürelerde kararlı olup, daha uzun kristalizasyon sürelerinde bu kararlılığını kaybederek kompleks silikatlara ayrıştığı, potasyum mikasında ise uzun süreli kristalizasyon sürelerinde bu tür bir ayrışma eğilimi gözlenmemiştir. Yapıda çökelen mika fazının hacimsel oranı artmasıyla işlenebilirlik yükselmektedir. Kalsiyum ve potasyum mikasının üst kristalizasyon sürelerinde 1 saat kristalize edilen diskler işlenebilmiştir.
In this study, the crystalization behaviour, microstructure and machinability of potassium-calcium mica glass-ceramics including %15 fluorapatite. Glasses, produced with tradiational glass-ceramics production techniques. The glass transition and crystallization temperatures were measured by differential thermal analyses(DTA). Various heat treatments planned according to the DTA informations, were applied to the glass samples. The crystallizing phases identified by X-ray diffraction. Mıcrostructures developed during various heat treatments were examined by the scanning electron microscopy(SEM). The hardness of the samples were determined by drilling. Ca mica which was the matrix phase was stabl for 1-2 hours at upper crystallization temperature. For the time more than 1-2 hours, this phase became unstabl and complex silicates decomposed. For K mica there wasn’t any decompose like this. The machinability properties is improved by increase in the volume ratio of precipitated mica phase. Ca and K mica had a good machinability.
In this study, the crystalization behaviour, microstructure and machinability of potassium-calcium mica glass-ceramics including %15 fluorapatite. Glasses, produced with tradiational glass-ceramics production techniques. The glass transition and crystallization temperatures were measured by differential thermal analyses(DTA). Various heat treatments planned according to the DTA informations, were applied to the glass samples. The crystallizing phases identified by X-ray diffraction. Mıcrostructures developed during various heat treatments were examined by the scanning electron microscopy(SEM). The hardness of the samples were determined by drilling. Ca mica which was the matrix phase was stabl for 1-2 hours at upper crystallization temperature. For the time more than 1-2 hours, this phase became unstabl and complex silicates decomposed. For K mica there wasn’t any decompose like this. The machinability properties is improved by increase in the volume ratio of precipitated mica phase. Ca and K mica had a good machinability.
Açıklama
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2003
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2003
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2003
Anahtar kelimeler
Cam-seramikler,
Kalsiyum-potasyum mika,
fluorapatit,
Glass ceramics,
Potassium-calcium mica,
fluorapatite