Betonarme Bir Ofis Binasının Tasarımı Ve Malzemenin Tasarıma Etkisi
Betonarme Bir Ofis Binasının Tasarımı Ve Malzemenin Tasarıma Etkisi
dc.contributor.advisor | Celep, Zekai | tr_TR |
dc.contributor.author | Hatipoğlu, Akın | tr_TR |
dc.contributor.department | Yapı Mühendisliği | tr_TR |
dc.contributor.department | Structural Engineering | en_US |
dc.date | 2005 | tr_TR |
dc.date.accessioned | 2015-07-03T11:34:00Z | |
dc.date.available | 2015-07-03T11:34:00Z | |
dc.description | Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2005 | tr_TR |
dc.description | Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005 | en_US |
dc.description.abstract | Bu çalışmada, 10 katlı betonarme bir binanın taşıyıcı sisteminin yatay ve düşey yükler altında çözümlemesi yapılarak taşıyıcı sistem elemanları boyutlandırılmıştır. Öncelikle zati ağırlıklar ve TS 498’de verilen hareketli yükler etkisi altında, TS 500 ve Deprem Yönetmeliği’nde (1997) belirtilen esaslara göre taşıyıcı sistem elemanlarınına ön boyut verilmiştir. Daha sonra ETABS (Nonlinear Version 8.11) sonlu elemanlar analiz programı kullanılarak yapının üç boyutlu modeli hazırlanmıştır. Yapının dinamik analizi için Deprem Yönetmeliği’nde belirtilen Spektral Analiz Yöntemi kullanılmıştır. Bu yöntem ile bulunan sonuçlar, yine Deprem Yönetmeliği’nde belirtilen Eşdeğer Deprem Yükü Yöntemi ile bulunan sonuçlarla mukayese edilmiş ve buna göre artırılmıştır. TS 500’de belirtilen düşey ve yatay yüklerin kombinasyonları programa tarif edilmiştir. Betonarme kesit hesaplarında kullanılan kesit tesirleri bu kombinasyonlardan elde edilmiştir. Çalışmanın son aşamasında çeşitli beton ve çelik sınıflarına göre perdelerin kesit hesabı tekrarlanmış ve malzemenin tasarıma etkisi irdelenmiştir.. Bütün hesaplar TS 500 ve Deprem Yönetmeliği’nde belirtilen esaslara göre yapılmıştır. | tr_TR |
dc.description.abstract | In this study, the elements of structural system of a 10-storey reinforced concrete office building are designed after analyzing the system under lateral and vertical loads. First of all, under the effects of dead and live loads given in TS (Turkish Standard) 498, preliminary dimensioning is made according to the criteria mentioned in TS 500 and Turkish Earthquake Code (1997). Afterwars, three dimensional modelling is made using the ETABS (Nonlinear Version 8.11) finite element analysis programme. For the dynamic analysis of the structure the Spectral Analysis Method in the Turkish Earthquake Code is used. Then the section forces found by this method are increased after comparing them with the section forces obtained by Equivalent Seismic Load Method. The load combinations of vertical and lateral loads, given in TS 500, are imposed to the programme. The internal forces used for the reinforced concrete section design are taken from these combinations. In the last part of the study, assuming different concrete and steel grades the shear walls are designed and required ratios of the steel are reported. All the calculations are based on to the design criteria in the TS 500 and Turkish Earthquake Code. | en_US |
dc.description.degree | Yüksek Lisans | tr_TR |
dc.description.degree | M.Sc. | en_US |
dc.identifier.uri | http://hdl.handle.net/11527/6870 | |
dc.publisher | Fen Bilimleri Enstitüsü | tr_TR |
dc.publisher | Institute of Science and Technology | en_US |
dc.rights | İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır. | tr_TR |
dc.rights | İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. | en_US |
dc.subject | Betonarme bina | tr_TR |
dc.subject | Spektral analiz | tr_TR |
dc.subject | Malzemenin tasarıma etkisi | tr_TR |
dc.subject | Reinforced concrete building | en_US |
dc.subject | Spectral analysis | en_US |
dc.subject | Effect of material on design | en_US |
dc.title | Betonarme Bir Ofis Binasının Tasarımı Ve Malzemenin Tasarıma Etkisi | tr_TR |
dc.title.alternative | Design Of A Reinforced Concrete Office Building And Effect Of Material On Design | en_US |
dc.type | masterThesis | en_US |