Analysis and design of a sensorless field oriented controlled motor drive for ariba solar car
Loading...
Files
Date
Authors
Department
Journal Title
Journal ISSN
Volume Title
Publisher
Graduate School
Type
Abstract
The increasing global energy demand, environmental concerns, and the depletion of fossil fuel resources have accelerated the transition toward sustainable transportation technologies. In this transition, electric vehicles have become one of the most promising solutions due to their high efficiency, low emissions, and compatibility with renewable energy systems. Among electric vehicle applications, solar-powered race vehicles (solar cars) represent one of the most challenging engineering problems because of their limited available energy, lightweight structures, and continuously changing operating conditions during long-distance races. Permanent Magnet Synchronous Motors (PMSM) have become widely preferred in electric vehicle applications because of their high efficiency, compact structure, high torque density, and superior dynamic performance. At the same time, advanced motor control techniques have significantly improved the efficiency and controllability of electric traction systems. In particular, Field-Oriented Control (FOC) enables precise torque regulation and highly efficient operation over a wide speed range, making PMSMs highly suitable for electric vehicle applications where energy utilization is critically important. Within this context, this thesis presents the design, implementation, simulation, and experimental validation of a three-phase motor drive system developed for the ITU Solar Car Team ARIBA vehicle. The developed motor driver was designed specifically for solar car applications where efficiency, reliability, compact structure, and stable operation under race conditions constitute the primary design objectives. At the beginning of the study, the operational requirements of the traction system were analyzed and translated into electrical, thermal, and control-oriented design constraints. Based on these requirements, the developed motor drive was designed to operate at a 150 V DC bus voltage level, withstand transient phase currents reaching 100 A, and provide approximately 5 kW continuous power capability. In addition to achieving high efficiency and power density, the system was required to maintain stable operation under regenerative braking conditions, sudden load variations, and thermally demanding operating scenarios. Since the traction motor used in the vehicle includes on Hall-effect sensors both conventional six-step commutation control and FOC algorithms were implemented within the same embedded control infrastructure. For FOC operation, two-phase current measurement together with battery current and voltage sensing circuits were developed for system monitoring, protection, and energy management purposes. In addition, hardware-based overcurrent protection structures and fault handling mechanisms were integrated into the system to ensure reliable operation under high-current conditions. The thesis presents a complete motor drive realization including inverter hardware, isolated gate driver circuits, sensing and protection structures, auxiliary power supplies, and embedded control software. Detailed design procedures of the inverter power stage, current and voltage sensing circuits, Hall sensor conditioning interfaces, and protection mechanisms are presented. In addition, simulation studies of both the hardware infrastructure and the implemented control algorithms were carried out to evaluate the operational stability, dynamic response, and overall control performance of the proposed system prior to experimental implementation. To experimentally validate the developed motor drive architecture, extensive tests were conducted using different permanent magnet motor topologies commonly encountered in electric vehicle applications. Hall sensor-based commutation control was successfully applied to Surface-Mounted PMSM (SPMSM), while FOC operation was implemented and validated on Interior PMSM (IPMSM). In addition, axial flux PMSM (AFPMSM) motors were experimentally driven using both commutation and FOC methods. Experimental results demonstrated that the developed hardware and embedded software infrastructure successfully satisfy the operational requirements defined for the ITU SCT ARIBA solar car while maintaining stable operation under different motor structures and high-current operating conditions. The obtained results verify that the proposed motor drive system provides a flexible, reliable, and high-performance solution suitable for advanced electric vehicle applications operating under race conditions.
Description
Thesis (M.Sc.) -- Istanbul Technical University, Graduate School, 2026
Journal or Series
ISSN
ISBN
Rights
Keywords
Permanent Magnet Synchronous Motor, Sürekli mıknatıslı senkron motor, Field Oriented Control, Alan yönlendirmeli kontrol, Motor drive design, Motor sürücü tasarımı, Solar powered vehicles, Güneş enerjili araçlar, ITU Solar Car Team (ARIBA), İTÜ Güneş Arabası Ekibi (ARIBA)