<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

Publication:
Performans Analizinde Doğrusal Elastik Eşdeğer Deprem Yükü Yöntemi İle Doğrusal Elastik Olmayan İtme Analizi Yönteminin Karşılaştırılması

Loading...
Thumbnail Image

Institution Authors

Journal Title

Journal ISSN

Volume Title

Publisher

Fen Bilimleri Enstitüsü
Institute of Science and Technology

Research Projects

Organizational Units

Journal Issue

Abstract

Ülkemizde meydana gelen depremlerin büyük çapta hasara ve can kayıplarına yol açması mevcut yapı stoğunun yeterli deprem güvenliğine sahip olmadığını göstermektedir. Mevcut yapıların deprem güvenliğinin arttırılması için güçlendirilmeleri ya da güçlendirmenin ekonomik olmadığı durumda yıkılıp yeniden yapılmaları gerekmektedir. Bu işlemlerin güvenilir bir şekilde yapılmasının ilk koşulu mevcut yapıların deprem performanslarının doğru bir şekilde belirlenmesidir. Bu çalışmada, mevcut betonarme bir konut binasının deprem performansının belirlenmesi için Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik 2007’de öngörülen doğrusal elastik “eşdeğer deprem yükü” ve doğrusal elastik olmayan “artımsal eşdeğer deprem yükü (itme analizi)” yöntemleri kullanılmış ve her iki yöntem ile elde edilen sayısal sonuçlar karşılaştırılmıştır. Dört bölümden oluşan yüksek lisans tezinin birinci bölümü, konunun açıklanmasına ayrılmış, çalışmanın amacı ve kapsamı hakkında bilgi verilmiştir. İkinci bölümde, mevcut yapıların deprem performanslarının belirlenmesi konusunda Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik 2007’de yer alan bilgiler aktarılmıştır. Üçüncü bölümde, sayısal incelemeler yer almaktadır. Bu bölümde, mevcut betonarme binanın deprem performansı Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik 2007’de tanımlanan doğrusal ve doğrusal olmayan hesap yöntemleri ile belirlenmiştir. Son bölüm elde edilen sonuçların değerlendirilmesine ayrılmıştır.
Occurrence of major material damage and loss of lives in earthquakes in our country show that the earthquake safety of existing building stock is not enough. Existing buildings should be strengthened to improve their earthquake safety. If strengthening is not economic they should be reconstructed. To operate this process reliable, it is necessary to determine earthquake performance of existing structures correctly. In this study, the linear “equivalent earthquake load” and the non-linear “incremental equivalent earthquake load (pushover)” evaluation methods given by 2007 Turkish Earthquake Code are used to determine the earthquake performance of a reinforced concrete building. The numerical results obtained by these methods are compared. In the first chapter of this master thesis, which consists of four chapters, explanation of the subject, purpose and scope are given. The second chapter gives general information about the seismic evaluation of the existing building, according to 2007 Turkish Earthquake Code. Numerical analysis is located in the third chapter. The seismic performance of the reinforced concrete building is determined according to linear and non-linear evaluation methods defined by the 2007 Turkish Earthquake Code. Final chapter covers the evaluation of results obtained in this study.

Description

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2012
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2012

Journal or Series

ISSN

ISBN

Rights

İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.

Keywords

deprem, deprem yönetmelikleri, betonarme binalar, performans analizi, earthquake, earthquake regulations, reinforced concrete buildings, performance analysis

Citation

Endorsement

Review

Supplemented By

Referenced By

Related Patent

Related Goal

Google Scholar
Scholar'da Ara ↗
Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.