Publication: Araçlarda Uğultu Tarzı Gürültünün Araştırılması
Loading...
Files
Date
Authors
Advisor
Department
Otomotiv
Automotive
Automotive
Journal Title
Journal ISSN
Volume Title
Publisher
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Type
Abstract
Bu çalışmada, ticari bir taşıtta belli bir devir sayısında, şanzımandaki vites konumundan bağımsız, araç kabininde oluşan uğultu şeklindeki rahatsız edici gürültü incelenmiştir. Bu uğultu şeklindeki gürültünün kaynağı, ileri ölçüm yöntemleri ile yarı anakoik odada yapılan testlerde tesbit edilmiştir. Gürültü transfer fonksiyonlarıyla kaynak ve ulaştığı yol araştırılmış, araç panellerinin titreşim modları, sesin kabin içinde yüksek olduğu bölgeler tesbit edilmiştir. Motor bir katı cisim gibi düşünülerek titreşim modları araştırılmıştır. Şanzıman takozundan geçen titreşimler, kabin içinde arka panelin ve kapıların rezonansa girmesine neden olmaktadır. Motor, bağlı olduğu takozlarda gürültünün oluştuğu frekansta rezonansa girmekte ve gelen titreşimler kabin içi kavite rezonansına sebep olmaktadır. Bu etkilerin sonuncunda kabin içinde uğultu şeklinde rahatsız edici gürültü oluşmaktadır. Gürültünün oluştuğu frekans bölgesinde motor ve şanzıman takozlarındaki iyileştirmeler ile kabin içinde meydana gelen uğultunun önlenebileceği düşünülmektedir.
In a certain engine speed range booming noise which is independent of gearbox positions inside the cabin of a commercial vehicle has been investigated in this study. Several noise and vibration tests in semi-anachoic room have been performed in order to identify the booming noise. Sources and paths have been investigated by noise transfer functions. Body panel vibrations, structural resonances and the sound pressure level inside the cabin have been measured. The engine block was thought to be a solid structure and its structural modes have been obtained by using a modal exciter. The vibrations through both the engine and gearbox mounts cause the resonanses of the rear panel and doors. Because of this situation, an unpleasant sound that can be called as booming noise has been formed. It is thought that if the performances of both engine and gearbox mounts are improved, the booming noise which occurred in a certain frequency range will be prevented.
In a certain engine speed range booming noise which is independent of gearbox positions inside the cabin of a commercial vehicle has been investigated in this study. Several noise and vibration tests in semi-anachoic room have been performed in order to identify the booming noise. Sources and paths have been investigated by noise transfer functions. Body panel vibrations, structural resonances and the sound pressure level inside the cabin have been measured. The engine block was thought to be a solid structure and its structural modes have been obtained by using a modal exciter. The vibrations through both the engine and gearbox mounts cause the resonanses of the rear panel and doors. Because of this situation, an unpleasant sound that can be called as booming noise has been formed. It is thought that if the performances of both engine and gearbox mounts are improved, the booming noise which occurred in a certain frequency range will be prevented.
Description
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2006
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2006
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2006
Journal or Series
ISSN
ISBN
Rights
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Keywords
kabin içi gürültü, uğultu, transfer fonksiyonları, kavite rezonansı, ses ve titreşim ölçüm yöntemleri, interior noise, booming noise, transfer functions, cavity resonance, noise and vibration measurements
Citation
Endorsement
Review
Supplemented By
Referenced By
28
Görüntülenme
33
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.