Publication: Burulma Düzensizliği Bulunan Çok Katlı Yapıların Deprem Yönetmeliği Açısından İrdelenmesi
Loading...
Files
Date
Authors
Advisor
Department
Yapı Mühendisliği
Structural Engineering
Structural Engineering
Journal Title
Journal ISSN
Volume Title
Publisher
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Type
Abstract
Bu çalışmada, burulma düzensizliğine sahip süneklik düzeyi karma olan çok katlı perde çerçeve türü yapılarda farklı analiz metodları sonucu bulunan iç kuvvetler karşılaştırılarak elde edilen sonuçlar deprem yönetmeliğine göre irdelenmiştir. Burulma düzensizliği ile ilgili yönetmelik koşulları örnek yapılar üzerinde uygulanarak Burulma Düzensizliği Katsayıları elde edilmiştir. Arttırılmış ek dışmerkezliklere göre bulunan iç kuvvetler ile burulma kütlesiz, burulma kütleli dinamik analiz ile kütlelerin kolon başlarında toplandığı durum için yapılan analiz sonucu bulunan iç kuvvetlerdeki değişim gözlemlenmiştir. Sonuçlar karşılaştırıldığında yönetmelikte öngörülen eşdeğer deprem yükü yöntemi ve burulma kütlesiz dinamik analizde, burulma modunun katkısının hesaba dahil edilememesi dolayısıyla diğer analiz yöntemlerinde bulunan iç kuvvetlerin daha elverişsiz olduğu anlaşılmıştır.
In this study, the multi-story structures that has torsional irregularity are analyzed by different methods and the end forces are compared. The structures are wall-frame type and has mixed ductilty level. The analysis methods are; the Equivalent Seismic Load Method, Dynamic Analysis using Mode-Superposition Method without torsional mass, Dynamic Analysis using Mode-Superposition Method by defining torsional mass, Dynamic Analysis using Mode-Superposition Method by defining masses at the top of the columns. The end forces of the comparison of the results with the examples given, because of the absence of taking into consideration the torsional effects at the Equivalent Seismic Load Method and Mode-Superposition Method without torsional mass, the analaysis results of the other methods are more inconvenient.
In this study, the multi-story structures that has torsional irregularity are analyzed by different methods and the end forces are compared. The structures are wall-frame type and has mixed ductilty level. The analysis methods are; the Equivalent Seismic Load Method, Dynamic Analysis using Mode-Superposition Method without torsional mass, Dynamic Analysis using Mode-Superposition Method by defining torsional mass, Dynamic Analysis using Mode-Superposition Method by defining masses at the top of the columns. The end forces of the comparison of the results with the examples given, because of the absence of taking into consideration the torsional effects at the Equivalent Seismic Load Method and Mode-Superposition Method without torsional mass, the analaysis results of the other methods are more inconvenient.
Description
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2005
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2005
Journal or Series
ISSN
ISBN
Rights
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Keywords
Burulma Düzensizliği, Dışmerkezlik, Dinamik Analiz, Torsional Irregularity, Eccentricity, Dynamic Analysis
Citation
Endorsement
Review
Supplemented By
Referenced By
25
Görüntülenme
406
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.