Analysis of the Structure of Marine Propeller Blades for Ice Navigation

Abstract

This study's analysis of the maritime propeller blade structure in ice navigation was motivated by an incident that caused the tip of a propeller blade to bend. The aim of this study was to demonstrate how the ice layer's confined space effect causes propeller blade tips to bend. Using computer-based software, a three-dimensional model of the propeller was created. The geometry of the three-dimensional propeller model was imported using the finite element approach into another piece of software. The propeller model and the environment were constructed after designing the ice environment. Using the computational fluid dynamics method, flux was calculated, and the composed pressure was derived. Following the specification of the alloy material for the propeller, the static structural module applied pressure values acquired to the propeller to measure the total deformation and stress. The data comparing the results of the simulation study are based on full-scale measurements. The maximum deformation in Ansys was 2.7-3.5 cm, whereas in the incident, it was 12 cm, which can be explained by persistent pressure or repeated initial movement steps. Considering these findings, the reason for blade tip bend, preventive measures, and recommendations have been proposed.