Publication: Yağ Temelli Üretan Yüzey Kaplayıcıların Akış Özelliklerinin İncelenmesi
Loading...
Files
Date
Authors
Advisor
Department
Kimya Mühendisliği
Chemical Engineering
Chemical Engineering
Journal Title
Journal ISSN
Volume Title
Publisher
Fen Bilimleri Enstitüsü
Instıtute of Science and Technology
Instıtute of Science and Technology
Type
Abstract
Bitkisel yağların izosiyanatlar ile reaksiyonu sonucu boya bağlayıcısı olarak kullanılabilecek ürünler elde edilir. Bu ürünlerin üretim ve kullanım aşamasındaki akış özelliklerinin belirlenmesinde en önemli parametrelerden biri de ürünün viskozitesidir. Bu çalışmada ayçiçeği yağı temelli üretan yağlarının viskoziteleri bir rotasyonel viskozimetre ile ölçülmüş ve elde edilen sonuçlardan sistemin matematiksel modellemesi yapılmıştır. Üretan yağlarının üretiminde ilk kademe yağın gliseroliz ürününün hazırlanması, ikinci kademe gliseroliz ürününün difonksiyonel izosiyanatlar ile reaksiyona sokulmasıdır. Gliseroliz ürünündeki hidroksil gruplarının ürün viskozitesine etkisini belirlemek için farklı hidroksil gruplarında ürünler elde edilmiştir. İzosiyanat komponentinin viskozite üzerine etkisi ise toluen diizosiyanat, hekzametilen diizosiyanat ve izosiyanatla sonlandırılmış prepolimer gibi değişik izosiyanat komponentleri ile çalışılarak araştırılmıştır.Ürün viskozitelerinin matematiksel modellemesi Bingham, Casson, Ostwald – De – Waele modelleri kullanılarak yapılmıştır.
Urethane oils are modified polymers produced by the reaction of isocyanate with hydroxyl containing oil derivatives. They can be considered as the alkyd resin in which the phthalic anhydride is replaced by a diisocyanate. Compared to an analogous oil – modified alkyd or epoxy resin, the urethane oil is more viscous, dries more rapidly and has better solvent and water resistance. In literature, there are various studies about the investigation on rheological properties of some polymers such as polyesters and polystyrene. Various models have been proposed to describe the viscosity of polymer solutions, melts, suspensions. Some of these equations are Carreau, Ellis, Cross, Bingham, Casson Models. The aim of this study was to deal with the rheological properties of oil – based urethane polymers. Additionaly, the relationship between viscosity and temperature was also investigated with using Arrhenius Equation.
Urethane oils are modified polymers produced by the reaction of isocyanate with hydroxyl containing oil derivatives. They can be considered as the alkyd resin in which the phthalic anhydride is replaced by a diisocyanate. Compared to an analogous oil – modified alkyd or epoxy resin, the urethane oil is more viscous, dries more rapidly and has better solvent and water resistance. In literature, there are various studies about the investigation on rheological properties of some polymers such as polyesters and polystyrene. Various models have been proposed to describe the viscosity of polymer solutions, melts, suspensions. Some of these equations are Carreau, Ellis, Cross, Bingham, Casson Models. The aim of this study was to deal with the rheological properties of oil – based urethane polymers. Additionaly, the relationship between viscosity and temperature was also investigated with using Arrhenius Equation.
Description
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2000
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2000
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2000
Journal or Series
ISSN
ISBN
Rights
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak herhangi bir biçimde yeniden oluşturulması veya dağıtılması yazılı izin alınmadan yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Keywords
Reoloji, Viskozite, Akış Modeli, Rheology, Viscosity, Flow Models
Citation
Endorsement
Review
Supplemented By
Referenced By
13
Görüntülenme
347
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.