<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

Publication:
Galyum Oksit İnce Filmlerin Elektron Demeti Buharlaştırma Yöntemiyle Üretimi Ve Karakterizasyonu

Loading...
Thumbnail Image

Institution Authors

Journal Title

Journal ISSN

Volume Title

Publisher

Fen Bilimleri Enstitüsü
Institute of Science and Technology

Research Projects

Organizational Units

Journal Issue

Abstract

Bu çalışmada, galyum oksit (Ga2O3) düz ve eğik açılı ince filmler elektron demeti buharlaştırma yöntemiyle üretilmiş ve özellikleri belirlenmiştir. Algılama katmanı olarak Ga2O3 düz ve eğik açılı ince filmlerin kaplandığı sensör yapıları oluşturulmuştur. İnce filmlerin analizinde XRD ve SEM yöntemleri kullanılmıştır. Üretilen Ga2O3 düz ve eğik açılı ince filmlerin ısıl işlemler ile yapıları optimize edilmiştir. Eğik açılı Ga2O3 ince filmlerin ısıl işlemler ile yapılarındaki porozitenin ve kolonsal yapıların değişimi incelenmiştir. Isıl işlemler ile kolonsal yapıların bir araya geldiği ve daha geniş boşlukların oluştuğu belirlenmiştir. Oluşturulan sensör yapılarının ise mavi ve beyaz floresan ışık altında fotoiletkenlik ölçümleri yapılmıştır. Eğik açılı Ga2O3 ince filmlerin, düz ince filmlerden daha yüksek hassasiyet gösterdiği belirlenmiştir. Aynı zamanda UV dalgaboyuna sahip mavi floresan ışık uygulandığında; eğik açılı ince filmin direnç değişiminin, düz ince filmin direnç değişimine oranının; beyaz floresan ışık altındakine göre daha fazla olduğu belirlenmiştir.
In this study, gallium oxide (Ga2O3) thin and oblique angled thin films are produced by e-beam evaporation and their properties are determined. Sensor structures that have Ga2O3 thin film sensing layers are formed. XRD and SEM methods are used to analyze thin films. Produced thin and oblique angled thin films are optimized by heat treatments. Changes in porosity and columnar structures of oblique angled Ga2O3 thin films are researched after heat treatments. As a result of heat treatments, at oblique angled Ga2O3 thin films, the formation of larger columnar structures and holes are determined. Photoconductivity measurements of produced sensor structures are made under blue and white fluorescent light. Oblique angled thin films are determined that they are more sensitive to radiation. Also, when blue fluorescent is applied, the ratio of conductivity change of oblique angled thin films to conductivity change of thin films is higher than the ratio at white fluorescent light.

Description

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2010
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2010

Journal or Series

ISSN

ISBN

Rights

İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.

Keywords

galyum oksit (Ga2O3), eğik açılı ince film, elektron demeti buharlaştırma, sensör, fotoiletkenlik, gallium oxide (Ga2O3), oblique angled thin films, e-beam evaporation, sensor, photoconductivity

Citation

Endorsement

Review

Supplemented By

Referenced By

Related Patent

Related Goal

Google Scholar
Scholar'da Ara ↗
Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.