Publication: Aminosilan İle Modifiye Edilmiş Üretan Yağı/titan Hibrit Filmleri Sentezlenmesi Ve Özelliklerinin İncelenmesi
Loading...
Files
Date
Authors
Advisor
Department
Kimya Mühendisliği
Chemical Engineering
Chemical Engineering
Journal Title
Journal ISSN
Volume Title
Publisher
Fen Bilimleri Enstitüsü
Institute of Science and Technology
Institute of Science and Technology
Type
Abstract
Bu çalışmada, titanyum izopropoxide (TIP) temelli kısım alkoxysilan ile birlikte trigliserit yapısına bağlanarak yeni bir yağ bazlı bağlayıcı sentezlenmiştir. Bu amaçla 3-aminopropiltrietoxysilan (APES)’ ın kısmi gliserit ve toluen diisosiyanat varlığındaki reaksiyonundan alkoxysilan ile modifiye edilmiş üretan yağı sentezlenir. Daha sonra yapıya TIP, AFUO’ nun alkoxy gruplarının TIP’ nın isopropoxide gruplarıyla verdiği sol-gel reaksiyonlarıyla katılır. Bu proses cam üzerinde neme doyurulmuş ince filimlere oda sıcaklığında uygulanır. Daha sonra kondenzasyon reaksiyonlarının tamamlanması için filmler 100 ºC de fırında bekletilir. En iyi film özelliklerini gösterecek bağlayıcının bulunması için optimum Ti miktarı belirlenir. Organik ve inorganik yapılar arasındaki kimyasal bağ FTIR ile ispatlanmıştır. Klasik üretan yağlarına kıyasla bu modifiye edilmiş üretan yağların daha iyi film özellikleri gösterdiği anlaşılmıştır.
In the present study, TiO2, as inorganic domain, was combined with triglyceride oil together with alkoxysilane as a new material for oil based binder. For this propose, aminosilane-functionalized urethane oil was firstly synthesized by the reaction of APES and partial gyceride mixture with toluene diisocyanate. Then, this intermediate was combined with titanium tetraisopropoxide by sol-gel reaction between alkoxy groups of the Si and Ti compounds. This process was applied on the moisture saturated thin films on a glass plate at room temperature. Then, the sol-gel procedure was completed by condensation reactions of Si−OH and Ti−OH groups at 100 ºC. For the best performance as a coating binder, the optimum Ti content was determined. Chemical bonding between titania domain and the polymer matrices was proved by FTIR. It was observed from the film tests that the hybrid composite coatings exhibited better adhesion, alkali resistance and water resistance compare to classical urethane oil.
In the present study, TiO2, as inorganic domain, was combined with triglyceride oil together with alkoxysilane as a new material for oil based binder. For this propose, aminosilane-functionalized urethane oil was firstly synthesized by the reaction of APES and partial gyceride mixture with toluene diisocyanate. Then, this intermediate was combined with titanium tetraisopropoxide by sol-gel reaction between alkoxy groups of the Si and Ti compounds. This process was applied on the moisture saturated thin films on a glass plate at room temperature. Then, the sol-gel procedure was completed by condensation reactions of Si−OH and Ti−OH groups at 100 ºC. For the best performance as a coating binder, the optimum Ti content was determined. Chemical bonding between titania domain and the polymer matrices was proved by FTIR. It was observed from the film tests that the hybrid composite coatings exhibited better adhesion, alkali resistance and water resistance compare to classical urethane oil.
Description
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2009
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2009
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2009
Journal or Series
ISSN
ISBN
Rights
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Keywords
bağlayıcılar, sol-gel prosesi, hibrit malzeme, Coating, Sol-gel process, hybrid material
Citation
Endorsement
Review
Supplemented By
Referenced By
7
Görüntülenme
48
İndirme
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.