Publication: Bakır Tellerin Soğuk Basınç Ve Direnç Kaynağı
Loading...
Files
Date
Authors
Advisor
Department
Journal Title
Journal ISSN
Volume Title
Publisher
Fen Bilimleri Enstitüsü
Instıtute of Science and Technology
Instıtute of Science and Technology
Type
Abstract
Tel çekme endüstrisinde, üretimin sürekliliğini sağlamada kaynak makineleri önemli bir yer tutmaktadır. Türkiye’de ve dünyada çeşitli yöntemlerle tel kaynağı yapılmaktadır. Bunlardan en popüler iki kaynak yöntemi; soğuk basınç kaynağı ve direnç kaynağıdır. Bu çalışmada, bakır tel endüstrisinde yaygın olarak kullanılan ve birbirine alternatif olan bu iki kaynak yönteminin, teknolojik ve ekonomik açıdan kıyaslanması amaçlanmıştır. Araştırmada; 1,60 mm ve 3,60 mm çapları arasında 11 farklı bakır tel kullanılmış ve bu tellere sırasıyla çekme testi, mikroyapı analizi ve mikrosertlik testleri uygulanmıştır. Yapılan çalışmalar sonunda, bakır tellerde, daha pahalı olan soğuk basınç kaynağı yönteminin, direnç kaynağı yöntemine göre teknolojik açıdan daha başarılı olduğu görülmüştür.
Welding machines are of substancial importance in maintaining the continuity of production in copper wire industry. Wire butt welding is made in Turkey and the rest of the world by various methods. The most popular two among those are, cold pressure welding and resistance welding. In this study, two alternative methods (cold pressure welding and resistance welding), which are used commonly in copper wire drawing industry, are compared in technological and economical bases. In the present research, tensile tests, microstructural examinations and microhardness measurements were carried out on 11 copper wires with different diameters in the range of 1.6 mm to 3.6 mm. Finally, it is concluded that, cold pressure welding technique, which is more expensive than resistance welding, achieved higher welding quality in copper wires.
Welding machines are of substancial importance in maintaining the continuity of production in copper wire industry. Wire butt welding is made in Turkey and the rest of the world by various methods. The most popular two among those are, cold pressure welding and resistance welding. In this study, two alternative methods (cold pressure welding and resistance welding), which are used commonly in copper wire drawing industry, are compared in technological and economical bases. In the present research, tensile tests, microstructural examinations and microhardness measurements were carried out on 11 copper wires with different diameters in the range of 1.6 mm to 3.6 mm. Finally, it is concluded that, cold pressure welding technique, which is more expensive than resistance welding, achieved higher welding quality in copper wires.
Description
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2000
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2000
Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2000
Journal or Series
ISSN
ISBN
Rights
İTÜ tezleri telif hakkı ile korunmaktadır. Bunlar, bu kaynak üzerinden herhangi bir amaçla görüntülenebilir, ancak yazılı izin alınmadan herhangi bir biçimde yeniden oluşturulması veya dağıtılması yasaklanmıştır.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
İTÜ theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission.
Keywords
Bakır, Direnç kaynağı, Kaynak, Soğuk Basınç Kaynağı, Tel, Cold Pressure Welding, Copper, Resistance Welding, Welding, Wire
Citation
Endorsement
Review
Supplemented By
Referenced By
Google Scholar
Scholar'da Ara ↗ Bu yayında DOI yok — Altmetric/Dimensions/PlumX/BIP! rozetleri DOI gerektirir.