LEE- Polimer Bilim ve Teknolojisi-Yüksek Lisans
Bu koleksiyon için kalıcı URI
Gözat
Konu "sanayi" ile LEE- Polimer Bilim ve Teknolojisi-Yüksek Lisans'a göz atma
Sayfa başına sonuç
Sıralama Seçenekleri
-
ÖgeHigh internal phase emulsion template method for fast and selective mercury adsorption(Graduate School, 2022-01-06) Yıldırım, Melis Şeval ; Yavuz, Erdem ; 515171009 ; Polymer Science and Technology ; Polimer Bilim ve TeknolojisiThere are many template methods for designing porous polymers. Porous polymers have become highly preferred in the industry due to their easy processability and properties. In this study, it was polymerized using a high internal phase emulsion template (HIPE). HIPE is named by looking at the ratio of the external phase volume to the total volume. If this ratio is greater than 0.74, it can be called HIPE.Macroporous polymers prepared by the HIPE method were used. The main disadvantage of PolyHIPE polymers is that they have a low high area (SBET ~9 m2g-1). To overcome this disadvantage, a hypercrosslinking reaction was performed. High surface area polymers were obtained with the Fiedel Crafts reaction (SBET ~ 594 m2g-1). After the hypercrosslinked polymer was obtained, three different functionalization steps were applied. These are respectively; aldehyde, carboxylic acid and amide functionalization. The main purpose of this study is to obtain a selective, fast adsorbent on mercury. It is amide groups that provide selectivity to mercury. The -CONR2 group was obtained from the -Cl groups. In this study, amide group was obtained from carboxylic acid by using four different amides as propylamine, ethanolamine, aniline, diethylamine and DIC/NHS. With the emulsion templating strategy, hypercrosslinking polymers with different hyper-crosslinking times (15 minutes, 30 minutes, 60 minutes, 22 hours) were obtained, increased to amide groups and adsorption studies were carried out. While the main product, HXL-30min-PHP-CONR2, adsorbs 28 mg/g mercury in the first 2 minutes, it is 40.5 mg/g in the 180th minute when it reaches equilibrium. For these studies, different pH ranges were tried (pH 3, pH 4, pH 5, pH 6, pH 7) and the optimum pH was found to be 7.Isotherm (Langmuir, Freundlich, Dubinin- Radushkevich) and kinetic (pseudo-first order, pseudo-second order, intra-particle diffusion) models were made for HXL-30min-PHP-CONR2. Window and void diameter were calculated by using SEM images with Imagej program. Reuse studies were performed for HXL-PHP-CONR2 using 0.1 M HNO3, and 90% capacity was observed up to the 5th cycle.